36
Manual shooting
■
Manually adjusting the focus
The lens focus can be adjusted manually.
When performing the operations
using the wireless remote control
1
Press the [M/FOCUS] button to switch the
focus to manual adjustment.
2
Press the [F] or [N] button of [FOCUS] to adjust
the focus.
When the [F] button is pressed, the focus moves further
away (far); conversely, when the [N] button is pressed, it
moves nearer (near).
The speed of focusing and other adjustments can
be switched to fast or slow by pressing the [FAST] or
[SLOW] button, respectively.
3
If necessary, press the [A/FOCUS] button to
return the focus to the automatic adjustment.
When performing the operations using the controller
When using an AW‑RP50:
Refer to the Operating Instructions of the controller.
●
When the focus is set to manual, the subject may
go out of focus during panning, tilting and zooming.
Therefore, the unit comes with a function which
compensates for this. (Focus compensation during
zooming function: Focus ADJ With PTZ.) (page 58,
page 95, page 98)
Note
■
Manually adjusting the iris
The lens iris can be adjusted manually.
When performing the operations
using the wireless remote control
1
Press the [M/IRIS] button to switch the iris to
manual adjustment.
2
Adjust the iris using the [IRIS +] or [IRIS –]
button.
Press the [IRIS +] button to adjust the lens iris in the
opening direction; conversely, press the [IRIS –] button to
adjust the lens iris in the closing direction.
3
If necessary, press the [A/IRIS] button to return
the iris to the automatic adjustment.
When performing the operations using the controller
When using an AW‑RP50:
Refer to the Operating Instructions of the controller.
●
In Night mode, the iris is set to open as a measure to
prevent video spying.
Adjust the brightness at the light source.
