13
Characteristics
Multiple number of formats supported
●
You can switch between the following formats via the
camera menus or a web browser.
Supported formats:
1080/59.94p, 1080/59.94i, 1080/29.97p, 1080/29.97PsF,
720/59.94p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF,
720/50p
1/2.3‑type MOS sensor and high‑performance 20× zoom
lens featured
●
A 1/2.3-type MOS sensor and DSP (digital signal
processor) are incorporated.
High-quality pictures are obtained by video processing in
many different kinds of ways.
●
In addition to its optical 20× zoom lens, the unit comes
with a 12× digital zoom to achieve high-quality images that
overflow with ambiance. Further, its i.Zoom function allows
up to 30× zoom while maintaining HD quality.
●
The unit is equipped with functions that allow clean
and clear reproduction of images in a wide range of
applications, such as high dynamic range (HDR) and
dynamic range stretch (DRS) functions that compensate
for overexposure and loss of dark detail and a digital noise
reduction (DNR) function that allows you to shoot scenes
clearly by minimizing image lag even in dark locations.
Easy operation of unit enabled by its integration with a
high‑performance pan‑tilt head unit
●
High-speed operations with maximum speed of 300°/s
during preset, and 90°/s during manual
●
Wide rotational angles with a panning range of ±175° and
a tilting range from –30° to +90°
●
Quiet operation with noise levels of NC35 (normal speed)
and NC40 (during preset)
●
Storage of up to 100 positions in the preset memory
(The number of preset memories that can be used varies
from one controller to another.)
Night mode incorporated
●
Infrared shooting is supported.
The kind of shooting which is normally difficult under very-
low-brightness conditions is now possible by exposing the
subjects to infrared rays.
(Black-and-white images are output in this case.)
●
The iris will be fixed at open.
IP video output function featured
●
The unit is equipped with image compression and IP
transmission LSI capabilities. IP video transmission in SD
format is possible.
In addition, output at up to 60 fps is possible for Full HD
images.
●
Employing the functions of this chip together with
IP control opens the door to uses in a wide range of
applications including the control of the camera from a
remote location.
High degree of compatibility with Panasonic’s currently
available controllers, enabling a flexible system to be put
together
●
A maximum of five units can be operated by serial control
from one of Panasonic’s currently available controllers
(AW-RP50).
The unit can also be used together with the cameras
and pan-tilt head unit systems currently available from
Panasonic Corporation so that an existing system can be
used to advantage to put together a system that is even
more flexible.
●
It may be necessary to upgrade the version of the
controllers in order to support the unit. For details
on upgrading, visit the support page on the following
website.
https://pro-av.panasonic.net/
●
The maximum distances between the units and
controller is 1000 meters (3280 ft). (when serial
control is exercised)
Use of an external device or some other means
must be provided separately in order to extend the
video signal connections.
Notes
Standard serial communication support
●
Connect up to seven cameras to a commercially available
controller via RS-232C interface.
Integrated pan‑tilt head unit, camera and lens to facilitate
installation
●
By designing the camera, lens and pan-tilt head as a
single integrated unit, the time taken for the installation
work has been drastically reduced.
Use of easy‑to‑operate wireless remote control (optional
accessory) is possible
●
A wireless remote control capable of operating up to four
units can be used.
It can easily be used to set the various functions or switch
between them while viewing the menu screens.
