Panasonic AVC ULTRA AJ-UPX36OED Operating Instructions Manual Download Page 183

Page: 183 / 210

– 183 –

Chapter 9 Network Connection — Connecting to the iPhone/iPad or Android terminal

NOTE

For information such as the supported OS of the CX ROP app, refer to the App Store or the Google Play Store download page.

Connecting to the CX ROP application

Connect to the camera following the CX ROP app guide.

NOTE

The camera cannot connect with the CX ROP app while the menu or thumbnail screen is displayed.

Operation while the CX ROP app is connected

Operation of the camera that is connected

Following buttons and dial cannot be used.

<MENU> button

<THUMBNAIL> button

Recording and playback operation while connected

Recording can be operated by either the camera or the CX ROP app.

Playback operation is not possible.

NOTE

The content set with the remote operation using the CX ROP app is reflected to the camera.

Summary of Contents for AVC ULTRA AJ-UPX36OED



















































































































































































































Search results

Summary of Contents for AVC ULTRA AJ-UPX36OED

Reviews:

Related manuals for AVC ULTRA AJ-UPX36OED

Brands by name

Popular brands

Panasonic AVC ULTRA AJ-UPX36OED, Operating Instructions Manual

Search results

Summary of Contents for AVC ULTRA AJ-UPX36OED

Reviews:

Related manuals for AVC ULTRA AJ-UPX36OED

Brands by name

Popular brands