Panasonic AVC ULTRA AJ-UPX36OED, Operating Instructions Manual

Page: 150 / 210

– 150 –
Chapter 6 Playback — Thumbnail operation
Copying clips
Clips can be copied between memory cards.
Only the clip recorded in P2 or AVCHD can be copied.
Fig. 1 Fig. 2
Fig. 4 Fig. 3
Fig. 5
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
2
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
3
Select the [THUMBNAIL] menu → [CLIP] → [COPY].
4
Select [SELECT]. (Fig. 1)
f
Selecting [ALL] copies all the clips between the memory cards.
5
Select the card slot for the copy destination. (Fig. 2)
The clips on the memory card of the copy source is displayed in the thumbnail screen. (Fig. 3)
f [SLOT1 → SLOT2]: Copies clips from the memory card in card slot 1 to the memory card in card slot 2.
f [SLOT2 → SLOT1]: Copies clips from the memory card in card slot 2 to the memory card in card slot 1.
6
Select the clip to copy in the thumbnail screen.
is displayed on the selected clip.
7
Select . (Fig. 4)
f This can also be selected by pressing and holding the multidial.
8
When the confirmation message is displayed, select [SET].
Progress bar is displayed, and the copy of the clip starts.
[OVERWRITE?] is displayed when there is a same P2 clip in the copy destination. Select [SET] when overwriting the clip, and select
when not
overwriting the clip.
f To cancel the copy midway, select [CANCEL].