Panasonic AV-HS60C3G, Operating Manual

Page: 146 / 176

– 146 –
Chapter 10 Specifications — Specifications
Specifications
Gateway Unit AV-LSG10
Power supply/Current consumed
<AC IN 1> AC ( ) 100 V to 240 V, 50 Hz/60 Hz, 1.5 A
<AC IN 2> AC ( ) 100 V to 240 V, 50 Hz/60 Hz, 1.5 A
Supports redundant power supply.
Power consumption
150 W
indicates safety information.
Video terminal
<SDI IN A 1> to <SDI IN A 4> terminals
<SDI IN B 1> to <SDI IN B 4> terminals
<SDI IN 1>, <SDI IN 2> terminals
Maximum of 10 lines
f
Connectors: BNC
×
10
4K signal × 10 lines
12G-SDI 12G serial digital, SMPTE2082 standard compliant (video signal only)
f
11.88/1.001 Gbps
<SDI OUT C 1> to <SDI OUT C 4> terminals
<SDI OUT 1>, <SDI OUT 2> terminals
Maximum of 6 lines
f
Connectors: BNC × 6
4K signal
×
6 lines
12G serial digital, SMPTE2082 standard compliant (video signal only)
f
11.88/1.001 Gbps
f
ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1,
DSKPVW1, DSKEXT1-1, DSKEXT1-2, DSKPGM2, DSKPVW2, DSKEXT2-1, DSKEXT2-2, MV1, MV2, and
AUX1 to AUX16 can be assigned.
<SFP28 1> to <SFP28 4> terminals
f
Connectors: SFP28
Used for connecting the XPT Unit.
f
Mellanox: Use MCP2M00-A001E30N.
Signal formats During 4K mode: 2160/59.94p, 2160/50p
During Standard mode: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i
Signal processing Y: P
B
: P
R
4: 2: 2 10 bit
Synchronous terminal
<REF> terminal In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through)
f
If the loop-through output is not used, provide a 75 Ω termination.
f
Connector: BNC
f
Same field frequencies as those of the system formats supported
The REF terminals cannot be used. Do not connect a cable.
Video delay time 2 lines (H) When the frame synchronizer is set to [Off]
1 frame (F) When the frame synchronizer is set to [On]
f
A delay is applied when via Resizer, DVE, or MultiView.
Control terminal
<LAN1> terminal Compatible with 1000BASE-T and AUTO-MDIX (For IP control)
f
Connection cable: LAN cable (CAT5E), max. 100 m (328 ft), STP (Shielded Twisted Pair cable recommended)
f
Connector: RJ-45
<LAN2> terminal For a future expansion feature.
Do not connect a cable.
Other
Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10% to 90% (no condensation)
Dimensions (W
×
H
×
D) 432 mm
×
44 mm
×
402 mm (17 inches
×
1-23/32 inches
×
15-13/16 inches) (excluding protrusions)
Mass
Approx. 6.4 k
]
(14.1 lbs.)