Panasonic AV-HS60C3G Operating Manual Download Page 116

Page: 116 / 176

– 116 –

Chapter 7 Configuring Operations — Setting the source name

Setting the source name

Setting the source name display panel

Set the display of the source name display panels on the crosspoint area and KEY/DSK operation area.

Select the <NAME> button

→

[SDI IN]/[IP IN]/[INTERNAL]/[ME]/[DSK]/[AUX]/[MV]

→

[Panel Name] tab.

Select an item in [Type] in the column that displays the source name to be set.

[Default]

Displays the same name as the column name.

[User]

Displays a desired name.

Displaying a desired source name

Select the <NAME> button

→

[SDI IN]/[IP IN]/[INTERNAL]/[ME]/[DSK]/[AUX]/[MV]

→

[Panel Name] tab.

Select [Name] in the column that displays the source name to be set.

Enter a desired name with the on-screen keyboard.

Setting the lighting status when the crosspoint area is off

Select the <NAME> button

→

[SDI IN]/[IP IN]/[INTERNAL]/[ME]/[DSK]/[AUX]/[MV]

→

[Panel Name] tab.

Select an item in [Color Group] in the column that displays the source name to be set.

Select an item from [ColorGroup1] to [ColorGroup8].
For details, refer to “Setting the colors when the buttons are turned off”.

Setting the MultiView display

Set the MultiView display.

Select the <NAME> button

→

[SDI IN]/[IP IN]/[INTERNAL]/[ME]/[DSK]/[AUX]/[MV]

→

[MV Name] tab.

Select an item in [Type] in the column that displays the source name to be set.

[Default]

Displays the same name as the column name.

[User]

Displays a desired name.

[Same as Panel]

Links to the setting from the <NAME> button on the top menu

→

[SDI IN]/[IP IN]/[INTERNAL]/[ME]/[DSK]/[AUX]/[MV]

→

[Panel Name] tab.

When [Picture] is selected in the [Panel Name] tab, this setting links to the [Default] setting.

Displaying a desired source name

Select the <NAME> button

→

[SDI IN]/[IP IN]/[INTERNAL]/[ME]/[DSK]/[AUX]/[MV]

→

[MV Name] tab.

Select [Name] in the column that displays the source name to be set.

Enter a desired name with the on-screen keyboard.

Summary of Contents for AV-HS60C3G

















































































































































































Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands

Panasonic AV-HS60C3G, Operating Manual

Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands