Panasonic AV-HS60C1E, Operation Manual

Page: 149 / 206

– 149 –
Chapter 8 System Menu — Setting the Main Frame AV‑HS60U1/AV‑HS60U2
[Disable] Does not display the preview screen for chroma key adjustment in each preview output.
Setting the ME1PVW/ME2 PVW output
A preview signal of the BKGD and KEY1 to KEY4 which were selected in the next transaction can be output.
Select [Key1] to [Key4] from the <ME1>/<ME2> button on the top menu
→ [KEY1] to [KEY4] → [Chroma] → [Sample] → [Chroma PVW] to switch to the
preview screen for chroma key adjustment of the corresponding keyer.
1
Select the <SYS> button → [MAIN FRAME] → [ME1,2] tab.
2
Select an item in [Key1 Enable] to [Key4 Enable] in the [ME1 PVW]/[ME2 PVW] column.
[Off] Does not output signals.
[On] Outputs the preview signal of the corresponding keyer.
3
Select an item in [Chroma PVW] in the [ME1 PVW]/[ME2 PVW] column.
[Enable] Displays the preview screen for chroma key adjustment in each preview output.
[Disable] Does not display the preview screen for chroma key adjustment in each preview output.
Setting the DSKPGM1/DSKPGM2 output
Selects the video to be the base of DSKPGM1 and DSKPGM2.
1
Open the <SYS> button → [MAIN FRAME] → [DSK] tab.
2
Select an item in the [DSK Assign] column → [Assign Mode].
[Common]
f
Makes the base video for DSKPGM1 and DSKPGM2 the same.
Setting of the [DSK Assign] column
→ [DSKPGM1] is applied to both DSKPGM1 and DSKPGM2.
[Each]
f
Different base videos can be set for DSKPGM1 and DSKPGM2.
Settings of the [DSK Assign] column
→ [DSKPGM1] and [DSKPGM2] are applied to DSKPGM1 and DSKPGM2
respectively.
3
Select an item in the [DSK Assign] column → [DSKPGM1]/[DSKPGM2].
[ME1PGM], [ME2PGM] ME1PGM and ME2PGM will be the base video, respectively.
[ME1CLN], [ME2CLN] ME1CLN and ME2CLN will be the base video, respectively.
f
For details of ME1CLN and ME2CLN output settings, refer to “Setting the ME1CLN/ME2CLN output” (page 148).
Setting DSKPVW1/DSKPVW2/DSK1CLN to DSK4CLN output
The unit can output 6 signals for preview output and clean output in addition to the DSKPGM1 or DSKPGM2 for program output as the DSK output.
f
DSKPVW1: Signal for preview of DSKPGM1
f
DSKPVW2: Signal for preview of DSKPGM2
f
DSK1CLN to DSK4CLN: Clean signal before adding each DSK (DSK1 to DSK4)
Following signals can be assigned to the DSKPVW2 in addition to the signal for preview of DSKPGM2.
f
DSK1PVW to DSK4PVW: Signal for individual preview of each DSK (DSK1 to DSK4)
f
DSKPST: The PVW output of the last ME line that the DSK is assigned
In addition to the clean signal, individual preview (DSK1PVW to DSK4PVW) for each can be assigned to DSK1CLN to DSK4CLN.
1
Select the <SYS> button → [MAIN FRAME] → [DSK] tab.
2
Select an item in [Combine] in the [DSK PVW] column.
f
Select the combine mode for DSKPVW1, DSKPVW2, DSK1PVW to DSK4PVW.
[On]
Adds DSK regardless of on/off of the DSK1 to DSK4.
f
DSK1PVW - DSK4PVW
Adds the corresponding DSK (DSK1 to DSK4) and all the DSK from the lower layers.
f
DSKPVW1, DSKPVW2
Adds the DSK in the uppermost layer and all DSK in the lower layer out of the DSK assigned to DSKPGM1 and
DSKPGM2.
[Off]
Adds DSK in accordance to the on/off of the DSK1 to DSK4.
f
DSK1PVW - DSK4PVW
The corresponding DSK itself (DSK1 to DSK4) is always added. The DSK for the lower layer is not added if it is off.
f
DSKPVW1, DSKPVW2
The DSK in the uppermost layer out of the DSK assigned to DSKPGM1 and DSKPGM2 is always added. The DSK for
the lower layer is not added if it is off.
f
The [DSK Base] setting in the [DSK PVW Base] column is fixed to [PGM].
3
Select an item in [DSK1 Enable] to [DSK4 Enable] in the [DSK PVW] column.
f
Select if each DSK is to be added to the preview output of DSK (DSKPVW1, DSKPVW2, DSK1PVW to DSK4PVW).