22
Description of Parts
10 Accessory mounting holes
For attaching accessories.
f
Mounting hole size
-
1/4-20 UNC (screw length 5.5 mm or shorter)
11 <USB HOST> terminal (inside the cover, 5.0 V 0.5 A max)
For mounting the wireless module AJ-WM30 (optional).
For the cable to connect to this terminal, prepare a double-shielded cable.
12 Focus hook
Indicate the focal plane of the MOS sensor. It provides a reference for measuring the accurate focal
length from the subject.
13 <VF SDI> terminal
An output terminal of 3G/HD SDI for connecting the viewfinder.
Use the BNC cable supplied with the viewfinder or the double-shielded cable equivalent to 5C-FB when
connecting a cable to this terminal.
14 <DC OUT> terminal
An output terminal to supply viewfinder power supply DC 12 V. Maximum of 1.0 A current can be
provided.
Use the DC cable supplied with the viewfinder when connecting a cable to this terminal.
15 Fan inlet
Fan inlet for dissipating heat. Do not block this when the camera is in use.
16 <LENS/GRIP> terminal
Terminal for connecting a lens cable. For details, refer to the Operating Instructions for the lens.
Cable for the grip module AU-VGRP1G (optional) can also be connected.
Front
2
3
4
5
1
1 Accessory mounting holes
For attaching accessories.
f
Mounting hole size
-
3/8-16 UNC (screw length 5.5 mm or shorter)
2 Lens cable clamp
A clamp for securing the lens cable.
