– 165 –
Chapter 9 Notes — Recording function that cannot be used simultaneously
Recording function that cannot be used simultaneously
Depending on the recording function that is set, there are recording functions that cannot be used simultaneously.
f
Meaning of the symbols used in the table are as follows.
-
l
: Can be used simultaneously.
-
—: Cannot be used simultaneously.
Recording function that is set
Recording function to
additionally set
Pre-recording*
1
*
2
Relay recording
Simultaneous recording
VFR*
3
*
4
Pre-recording*
1
*
2
l
l
—
Relay recording
l
—
l
*
5
Simultaneous recording
l
—
l
*
5
VFR*
3
*
4
—
l
*
5
l
*
5
*1 Time code is fixed to free run.
*2 The pre-recording is cancelled once when three hours has passed without starting the recording.
*3 Cannot set simultaneously in the following cases.
f
When recording in AVCHD format
*4 Time code is fixed to recording run.
*5 The function will not operate if the [SYSTEM SETTINGS] menu
→
[SYSTEM MODE]
→
[SENSOR MODE] is set to [S35 MIX 2.8K] or [4/3 CROP&MIX 2.2K].
