– 15 –
Chapter 1 Overview — What you can do with this camera
What you can do with this camera
Interchangeable lens 4K/60P camera
This camera is a interchangeable lens 4K/60P camera with following features.
f
High-resolution recording of 4:2:2 (10 bits) 4K/2K with newly developed super 35 mm 5.7K sensor and new LSI is possible*
1
-
Supports 120fps/240fps recording in 2K, FHD*
2
f
Equipped with new functions to arouse the creativity
-
RAW output: Output RAW, 5.7K/30P, or 4K/60P (crop size) from the <SDI OUT> terminal*
3
-
Supports HDR production (V-Log/HLG)
-
Can easily perform IR recording, making possible of fantastical image representation
f
Equipped with interfaces supporting the designs and recordings for wide range of usage
-
A compact design considering to install on a drone or a gimbal, each unit (handle, grip, LCD monitor) can be removed in accordance with the
recording style
-
Equipped with first in industry (as of October 2017) camera internal image stabilizer (E.I.S.)
-
Can simultaneously output in 4:2:2 (10 bits) from <SDI OUT> terminal/<HDMI> terminal
-
Equipped with double card slots compatible to high-speed bus interface UHS-II
Supports 400 Mbps ALL-Intra recording that can record in higher picture quality*
3
-
Adopted the EF lens mount as the lens mount
Can use the EF lenses with various lineup
*1 Up to 4K/30P, 2K/120P
*2 When the frame rate exceeding 120P, internal recording eight-bit 4:2:0, 4K crop size
*3 Supports firmware update
Recording to the memory card
SD card
Recording in following types is possible.
f
4K, UHD, 2K, FHD recording
(4:2:0 (8 bits) MOV recording/4:2:2 (10 bits) MOV recording)
f
AVCHD recording
f
Variable frame rate recording
(Supports 120fps/240fps recording in 2K, FHD)
f
Simultaneous recording
f
Relay recording
Linking to external devices
Connecting to monitor
A monitor can be connected to output images.
f
Use the double shielded cable supporting 4K/60P as the HDMI cable (optional). It is also recommended to use the Panasonic 4K/60P compatible
HDMI cable.
f
For the BNC cable (optional) connected to the <SDI OUT> terminal, prepare a double-shielded cable equivalent to 5C-FB.
HDMI cable
BNC cable (<SDI OUT> terminal)
Monitor
Remote operation by iPad or Android terminal
The camera can be connected to the wireless LAN by connecting a wireless module compatible to the camera to the <USB2.0 HOST> terminal of
camera.
Following operations are possible by connecting the camera with an iPad or an Android terminal with EVA ROP app installed.
f
Checking camera status
f
Camera remote control (recording control, camera setting such as shutter, EXPOSURE INDEX, iris, or white balance, and checking the time code)
f
Menu Operations
For details of the wireless module supported by the camera and the operation of the EVA ROP app, visit the support desk at the following website.
http://pro-av.panasonic.net/
