Panasonic AU-EVA1E Operating Instructions Manual Download Page 14

Page: 14 / 175

– 14 –

Chapter 1 Overview — Use of the camera on a system

Use of the camera on a system

Anything other than the camera, LCD monitor, handle, and grip is optional. Use the following recommended parts.

Basic configuration devices

Equipment necessary for shooting with the camera, such as batteries, etc.

Part name

Part No.

Remark

EF lens*

CANON/ZEISS/SIGMA

“Mounting the lens”

Super-directional electret stereo microphone

(phantom

48V)

AG-MC200G

“Mounting the external microphone”

Battery

AG-VBR59 (7.28 V, 5900 mAh, product compatible

to the included battery)

AG-VBR89 (7.28 V, 8850 mAh)

AG-VBR118 (7.28 V, 11800 mAh)

VW-VBD58 (7.2 V, 5800 mAh)

“Attaching and removing the battery”

Battery charger

AG-BRD50 (Product compatible to included battery

charger)

AG-B23

“Charging the battery”

SD card*

Visit the support desk at the website*

“Preparing the SD card”

* For the latest information not included in these Operating Instructions, refer to the support desk at the following website.

http://pro-av.panasonic.net/

Expanded configuration devices

In addition to the basic components, a wireless module can be used.

Part name

Part No.

Remark

Wireless module

AJ-WM50

“Mounting the wireless module”

For details on wireless modules that can be connected, refer to the support desk at the following website.
http://pro-av.panasonic.net/

Summary of Contents for AU-EVA1E
















































































































































































Search results

Summary of Contents for AU-EVA1E

Reviews:

Related manuals for AU-EVA1E

Brands by name

Popular brands

Panasonic AU-EVA1E, Operating Instructions Manual

Search results

Summary of Contents for AU-EVA1E

Reviews:

Related manuals for AU-EVA1E

Brands by name

Popular brands