– 118 –
Chapter 5 Shooting — Image quality adjustment
2
Set the [SCENE FILE SETTINGS] menu
→
[DETAIL]
→
[CORING]/[MASTER LEVEL]/[FREQUENCY].
[CORING]:
Sets the level of signal (including noise) not to activate the detail effect.
[MASTER LEVEL]:
Sets the level of the detail effect of the whole part.
[FREQUENCY]:
Sets the thickness of the detail as a whole.
[SKIN DETAIL]
A function to make human skin look smoother.
1
Select the [SCENE FILE SETTINGS] menu
→
[SKIN DETAIL].
2
Set one of [SKIN DTL1]/[SKIN DTL2]/[SKIN DTL3] to [ON].
[SKIN DTL1]/[SKIN DTL2]/[SKIN DTL3] can be used in conjunction.
[CHROMA]
Sets the color saturation.
1
Select the [SCENE FILE SETTINGS] menu
→
[CHROMA]
→
[LEVEL].
Sets the chroma level of P
R
and P
B
signals. The distance from the center (no color) is increased or decreased for the entire image when the vector
scope is used.
[MATRIX]
In the matrix table, the most appropriate setting is automatically selected in accordance with the gamma setting. The setting value is changed relatively
to set the representation of color of the image against the selected matrix table.
Representation of all the colors in the image is changed along with the change in the setting.
Since this is the relative adjustment, the representation of the color differs when the set matrix table is different even if they are the same values.
R
Mg
G
Cy
B
Yl
R
Mg
G
Cy
B
Yl
R
Mg
G
Cy
B
Yl
R
Mg
G
Cy
B
Yl
R
Mg
G
Cy
B
Yl
R
Mg
G
Cy
B
Yl
(R-G)
(R-G)
(G-B)
(G-B)
(B-R)
(B-R)
(R-B)
(G-R)
(G-R)
(B-G)
(B-G)
(R-B)