Panasonic AU-EVA1E, Operating Instructions Manual

Page: 107 / 175

– 107 –
Chapter 4 Operation — Handling setting data
Saving the scene file as a new file in the SD card
Saves the current setting value of the camera into the SD card in the card slot 1 as a new file by specifying the file name.
1
Select the [FILE] menu → [SCENE FILE] → [SAVE AS].
The file name entry screen and the keyboard are displayed.
2
Enter the text to set with the keyboard.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
f
An error message may be displayed. For details regarding the error message, refer to “Cases indicated by error messages”.
Reading the scene file
Reads the scene files saved in the camera memory or the SD card in the card slot 1.
Reading the scene file from the camera memory
1
Select the [SCENE FILE SETTINGS] menu → [SCENE DATA] → [LOAD].
Reading the scene file from the SD card
1
Select the [FILE] menu → [SCENE FILE] → [LOAD].
The list of scene files stored in the specified folder in the SD card in the card slot 1 is displayed.
2
Select the file name for the file to read.
3
Selects if all of the scene files ([SCENE1] to [SCENE5]) are read, or individually read.
f
To read all, select [ALL].
To read individually, select the scene number to read.
4
Select [SET].
The file is read.
f
An error message may be displayed. For details regarding the error message, refer to “Cases indicated by error messages”.
Setup file
Specified menu can be saved in the SD card in the card slot 1, or read it into the camera from the SD card.
Saving the setup file
The setup file can be overwritten to a file in the SD card in the card slot 1, or save as a new file.
Saving the setup file by overwriting a file in the SD card
Overwrites the file selected in the list of the setup files saved in the SD memory card with the current setting value of the camera.
1
Select the [FILE] menu → [SETUP FILE] → [SAVE].
The list of setup files saved in the SD card in the card slot 1 is displayed.
2
Select the file to overwrite from the list of setup files.
The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Saving the setup file as a new file in the SD card
Saves the current setting value of the camera into the SD card in the card slot 1 as a new file by specifying the file name.
1
Select the [FILE] menu → [SETUP FILE] → [SAVE AS].
The file name entry screen and the keyboard are displayed.
2
Enter the text to set with the keyboard.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
f
An error message may be displayed. For details regarding the error message, refer to “Cases indicated by error messages”.