Panasonic AU-EVA1, Operating Instructions Manual

Page: 92 / 184

– 92 –
Chapter 4 Operation — Menu setting contents
[OUTPUT SETTINGS] menu
Sets the display content or output format of the video.
[SDI OUT]
[OUTPUT SW]
Enables/disables the output from the <SDI OUT> terminal.
[ON] Outputs the video.
[OFF] Does not output the video.
(Factory setting: [ON])
@ @ NOTE
t
It will be fixed to [ON] when the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].
[SIGNAL SEL]
Sets the output from the <SDI OUT> terminal.
[SDI] Outputs the signal set in [OUT FORMAT] of [SDI OUT].
[LCD(1080p)] Outputs the video displayed on the LCD monitor in 1920 × 1080p.
[LCD(1080i)]
Outputs the video displayed on the LCD monitor in 1920 × 1080i.
(Factory setting: [SDI])
@ @ NOTE
t
It will be fixed to [SDI] when the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF].
[OUT FORMAT]
Selects the signal to be output from the <SDI OUT> terminal. The items that can be selected differ depending on the setting in the [SYSTEM
SETTINGS] menu
→ [SYSTEM MODE] → [FREQUENCY]/[MAIN PIXEL].
[4096x2160p] Outputs in 4096 × 2160p.
[3840x2160p]
Outputs in 3840 × 2160p.
[1920x1080p] Outputs in 1920 × 1080p.
[1920x1080i] Outputs in 1920 × 1080i.
[1920x1080PsF] Outputs in 1920 × 1080PsF.
[1280x720p]
Outputs in 1280 × 720p.
(Factory setting: [1920x1080PsF])
@ @ NOTE
t
For the combination that can be set, refer to “Format that can be output from the <SDI OUT> terminal”.
t
When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
[3G-SDI OUT]
Sets the format of the 3G SDI signal output from the <SDI OUT> terminal. Can be set when the 3G SDI signal is output.
[LEVEL-A] Selects the LEVEL-A method.
[LEVEL-B] Selects the LEVEL-B DL method.
(Factory setting: [LEVEL-B])
@ @
NOTE
t
When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be controlled or not.
[ON] Controls the recording operation of the external equipment.
[OFF] Does not control the recording operation of the external equipment.
(Factory setting: [OFF])
@ @ NOTE
t
When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this cannot be set.
t
When the [REC SETTINGS] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL], this cannot be set.
[INDICATOR DISP]
Displays/hides the item set in [SDI/HDMI INDICATOR] for the output from the <SDI OUT> terminal.
[ON] Displays the shutter speed, remaining battery level, etc. Content of display follows the setting in [SDI/HDMI INDICATOR].
[OFF] Hides all.
(Factory setting: [ON])