– 63 –
Chapter 4 Operation — Displaying the HOME screen
Displaying the HOME screen
Status of the camera can be confirmed.
1
7
8
9
10
13
14
15
16
17
18
11
12
2
3
4
5
6
1
[FPS]
Displays the setting status of the variable frame rate recording function and the recording frame rate.
2
[COLOR]
Displays the color setting of the video recorded to the main recorder.
3
[SHUTTER]
Displays the shutter speed.
[sec]:
Displays in time.
[deg]:
Displays at shutter open angle.
4
[EI]
Displays the EXPOSURE INDEX (gain).
[ISO] and [dB] can be switched with the [CAMERA SETTINGS] menu
→
[EI]
→
[MODE].
5
[AUDIO]
Displays the status of the audio input for audio channel 1 and the audio channel 2.
[IN1]:
The <AUDIO INPUT 1> terminal is selected as the audio input.
[IN2]:
The <AUDIO INPUT 2> terminal is selected as the audio input.
[MIC]:
An external microphone is selected as the audio input.
[LINE]:
An audio device is selected as the audio input.
[INT(L)]:
The built-in microphone <L> is selected as the audio input.
[INT(R)]:
The built-in microphone <R> is selected as the audio input.
[48V]:
The external microphone power supply is enabled.
6 [WB]
Displays the color temperature (white balance).
In case of the preset list acquired by the auto white balance, the color temperature is displayed with [A] at the beginning.
[ATW]:
Displays while the auto tracking white balance is operating.
[ATW LOCK]:
Displays when the auto tracking white balance is locked.
7 Number of recorded pixels/system frequency
Displays the number of recording pixels and the system frequency.
When the [SYSTEM SETTINGS] menu
→
[SYSTEM MODE]
→
[SDI RAW] is set to anything other than [OFF], the RAW output resolution and the
system frequency from <SDI OUT> terminal are displayed.
8 Pre-recording status display
Displays the re-recording status.
:
When the [REC SETTINGS] menu
→
[PRE REC]
→
[ON] is set and pre-recording is enabled
(No display):
When the [REC SETTINGS] menu
→
[PRE REC]
→
[OFF] is set, or when pre-recording is unable
9 Card slot 1/card slot 2 status display
Indicates the insertion status, current recording target, and remaining recordable capacity of the SD card.
:
When the SD card is inserted, and it is set as the recording target
:
When the SD card is inserted, but it is not set as the recording target
[0min]…[999min]:
Remaining recordable capacity (0 - 999 minutes, 999 minutes or more is displayed as [999min])
[END]:
When there is no remaining recordable capacity
[WP]:
When the write protect switch of the SD card is set to the LOCK side
[!SDXC]:
When the SDHC memory card is inserted, and the [SYSTEM SETTINGS] menu
→
[SYSTEM MODE]
→
[MAIN CODEC] is set to a file in
MOV format (displayed in red)
[ERR]:
When a recording media that cannot be recorded is inserted (displayed in red)
(No display):
When the SD card is not inserted, or when the [SYSTEM SETTINGS] menu
→
[SYSTEM MODE]
→
[SDI RAW] is set to anything
other than [OFF]
10 Special recording function display
Displays the setting and enable/disable status of the special recording function of each card slot.
[RELAY]:
When set to relay recording
[SIMUL]:
When set to simultaneous recording
[INTRVL]:
When set to interval recording
