– 162 –
Chapter 8 Connecting to External Devices — Preparing to connect the iPad or Android terminal
Preparing to connect the iPad or Android terminal
Mounting the wireless module
Mount the wireless module (optional) to the camera.
Before mounting or removing the wireless module, always turn the power switch to < > (standby), and confirm that the power lamp is off.
1
Open the terminal cover for the <USB2.0 HOST> at the rear.
2
Connect the wireless module to the <USB2.0 HOST> terminal.
Insert it all the way.
f
For details on the wireless module supporting the camera, visit the support desk at the following website.
https://pro-av.panasonic.net/
Cautions when using wireless module AJ-WM50
Read the operating manual of the wireless module thoroughly and understand it before using.
For the latest information, visit the support desk at the following website.
https://pro-av.panasonic.net/
Preparing the EVA ROP app
Install the EVA ROP app into the iPad or Android terminal.
r
For iPad
f
Download the EVA ROP app from App Store.
r
For Android terminal
f
Download the EVA ROP app from Google Play Store.
@
@
NOTE
t
For details such as OS that supports EVA ROP app, refer to the support desk at the following website:
https://pro-av.panasonic.net/
Operation while the EVA ROP app is connected
r
Operation of the camera that is connected
Following buttons and dial cannot be used.
f
<MENU> button
f
<THUMBNAIL> button
r
Recording and playback operation while connected
f
Recording can be operated by either the camera or the EVA ROP app.
f
Playback operation is not possible.
@
@
NOTE
t
The content set with the remote operation using the EVA ROP app is reflected to the camera.
