– 102 –
Chapter 4 Operation — Menu setting contents
[FILE] menu
Saves and reads the setting data.
For saving and loading target, refer to “Target items for scene file/setup file/initialization”.
For details of saving and loading, refer to “Handling setting data”.
[SCENE FILE]
[LOAD]
Selects the scene file saved in the SD card and reads it into the camera.
Can select if all of the scene files ([SCENE1] to [SCENE5]) are read, or individually read.
[SAVE]
The setting value of the current scene file ([SCENE1] to [SCENE5]) is overwritten to the file selected from the list of scene
files saved in the SD card.
[SAVE AS]
The setting value of the current scene file ([SCENE1] to [SCENE5]) is saved to the SD card as a new scene file by entering
the file name.
[SETUP FILE]
[LOAD]
Selects the setup file saved in the SD card and reads it into the camera.
[SAVE]
Overwrites the file selected in the list of the setup files saved in the SD memory card with the current setting value of the
camera.
[SAVE AS]
Saves the current setting value in the camera as a new setup file in the SD card by entering the file name.
[NETWORK SETTINGS] menu
Sets the setting regarding the network function.
[NETWORK SEL]
Sets if the external equipment (PC, etc.) and the camera is to be connected to the network using the wireless LAN.
[WLAN]
Connects with wireless LAN.
[OFF]
Does not connect.
(Factory setting: [OFF])
[NETWORK FUNC]
[USER ACCOUNT]
Sets the user account to be used for authentication in the network function of the camera.
[ADD]
Newly registers the user account. It is set as follows when not registered.
User account name: “guest”, password: “auguest”
[DELETE]
Deletes the registered user account. This will not operate when not registered.
[NETWORK PROPERTY]
[MAC ADDRESS]
Displays the wireless LAN MAC address of the camera. (Cannot be changed)
[TYPE]
Sets the connection method to the wireless LAN.
[DIRECT]
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet
terminal.
[INFRA(SELECT)]
Connects to the wireless access point. The access point is selected from the list.
[INFRA(MANUAL)]
Connects to the wireless access point. Wireless access point is entered manually.
(Factory setting: [DIRECT])
[SSID]
Enters or displays the network name of the camera (SSID).
(Factory setting: [AU-EVA1])
[BAND]
Switches between two communication methods ([2.4GHz] or [5GHz]) when [NETWORK PROPERTY]
→
[TYPE]
→
[DIRECT] is selected.
The items that can be set are as follows.
f
[2.4GHz], [5GHz]
(Factory setting: [2.4GHz])
[CHANNEL(2.4GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f
The [NETWORK SETTINGS] menu
→
[NETWORK PROPERTY]
→
[TYPE]
→
[DIRECT]
f
The [NETWORK SETTINGS] menu
→
[NETWORK PROPERTY]
→
[BAND]
→
[2.4GHz]
