Panasonic AK-UB300G, Operating Instructions Manual

Page: 94 / 110

– 94 –
Chapter 7 UB300 Setting Tool — Operation
Operation
Startup
For Windows
1
Click [Start] → [Program] → [Panasonic] → [UB300 Setting Tool].
@ @ NOTE
t
A security warning may be displayed when UB300 Setting Tool is started up without setting the port opening.
In such case, follow the instruction in the warning to allow the access by UB300 Setting Tool.
r
To exit
1
Click [ × ] at top right while operating.
For Macintosh
1
Double-click the [UB300 Setting Tool] icon in the Application folder from [Finder].
r
To exit
1
Click the red button at the left while operating.
Top screen
This is the screen displayed during startup.
1
2
6
3
4
5
1 [Status]
Displays the connection status of AK-UB300G and contents of the occurred error.
2 [Connection Setting] button
Displays the connection setting screen to the AK-UB300G. The connection setting screen is automatically displayed right after the startup.
3 [Firmware Update] button
Displays the firmware update execution screen of AK-UB300G.
4 [Main Menu] button
Selects the setting menu to change in the connected AK-UB300G.
5 [OSD Menu Operation] button
This is the button for the OSD operation. This can display the OSD menu or operate the cursor against the output image of AK-UB300G.
6 Menu setting screen
Displays the setting menu for the category selected by the [Main Menu] button. The content of the setting can be changed.