Panasonic AK-UB300G, Operating Instructions Manual

Page: 48 / 110

– 48 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[SHUTTER SPEED] Sets the shutter speed when [SHUTTER MODE] is [SHUTTER].
[59.94i]/[59.94p] mode:
[1/100], [1/120], [1/125], [1/250], [1/500], [1/1000], [1/1500], [1/2000], [180.0deg], [172.8deg],
[144.0deg], [120.0deg], [90.0deg], [45.0deg]
[50i]/[50p] mode:
[1/60], [1/100], [1/125], [1/250], [1/500], [1/1000], [1/1500], [1/2000], [180.0deg], [172.8deg], [144.0deg],
[120.0deg], [90.0deg], [45.0deg]
[29.97p] mode:
[1/48], [1/50], [1/60], [1/96], [1/100], [1/120], [1/125], [1/250], [1/500], [1/1000], [1/1500], [1/2000],
[180.0deg], [172.8deg], [144.0deg], [120.0deg], [90.0deg], [45.0deg]
[25p] mode:
[1/48], [1/50], [1/60], [1/96], [1/100], [1/125], [1/250], [1/500], [1/1000], [1/1500], [1/2000], [180.0deg],
[172.8deg], [144.0deg], [120.0deg], [90.0deg], [45.0deg]
[23.98p] mode:
[1/48], [1/50], [1/60], [1/96], [1/100], [1/120], [1/125], [1/250], [1/500], [1/1000], [1/1500], [1/2000],
[180.0deg], [172.8deg], [144.0deg], [120.0deg], [90.0deg], [45.0deg]
f
Factory setting: [1/100]
[SYNCHRO SCAN DISP] Sets the unit to display the synchro scan mode.
[SEC]: Displays in time.
[DEG]: Displays at shutter open angle.
f
Factory setting: [SEC]
[SYNCHRO SCAN] Sets the shutter speed when [SHUTTER MODE] is [SYNCHRO].
[59.94i]/[59.94p] mode:
[61.7Hz] - [6130Hz]
f
Factory setting: [61.7Hz]
[50i]/[50p] mode:
[51.5Hz] - [6250Hz]
f
Factory setting: [51.5Hz]
[29.97p] mode:
[30.9Hz] - [2600Hz]
f
Factory setting: [30.9Hz]
[25p] mode:
[25.7Hz] - [3130Hz]
f
Factory setting: [25.7Hz]
[23.98p] mode:
[24.7Hz] - [2880Hz]
f
Factory setting: [24.7Hz]
When [DEG] is displayed:
[3.0deg] - [359.5deg]
f
Factory setting: [180.0deg]
[TALLY]
Item Description of settings
[FRONT TALLY] Sets enable/disable and brightness of the front tally lamp.
[OFF], [LOW], [HIGH]
f
Factory setting: [LOW]
[BACK TALLY] Sets enable/disable and brightness of the back tally lamp.
[OFF], [LOW], [HIGH]
f
Factory setting: [LOW]
[BAR SETTING]
Item Description of settings
[BAR SW] Enables/disables the color bar.
[OFF], [ON]
f
Factory setting: [OFF]
[BAR SELECT] Sets the type of the color bar.
[FULL], [SMPTE], [ARIB]
f
Factory setting: [FULL]
[PAINT]
[PAINT SWITCH]
Item Description of settings
[WHITE SHADING] Enables/disables the white shading (saw-toothed waveform or parabolic waveform).
[OFF], [ON]
f
Factory setting: [ON]
[FLARE] Enables/disables flare.
[OFF], [ON]
f
Factory setting: [ON]