Panasonic AK-UB300G, Operating Instructions Manual

Page: 23 / 110

– 23 –
Chapter 3 Operation — On-screen displays of the monitor
On-screen displays of the monitor
The setting and the operation status of the Multi-Purpose Camera are displayed in the monitor screen.
All items that can be displayed are located as follows.
2160-59.94P FBC DRS AGC H.SENS.
1 15000K 1/2000 36dB +24dB D.EX EX2 F5.6 Z99
ATW HAZE R
1 2 4 5 6 7 8 9
10 11 12
19
20
15 17 18 16 14 13
3
19
19 19
1 System mode display
Indicates the system frequency.
f
[2160/59.94p]
f
[2160/50p]
f
[2160/29.97p]
f
[2160/25p]
f
[2160/23.98p]
f
[1080/59.94p]
f
[1080/59.94p CROP]
f
[1080/59.94i]
f
[1080/50p]
f
[1080/50p CROP]
f
[1080/50i]
f
[1080/29.97PsF]
f
[1080/25PsF]
f
[1080/23.98p]
f
[1080/23.98PsF]
f
[720/59.94p]
f
[720/50p]
2 Tally display
This is displayed when a tally signal is sent.
3 Warm up warning
This is displayed when the internal temperature is low.
4 High-sensitivity mode display
This is displayed when set to [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [HIGH SENS].
5 Flash band compensation display
This is displayed when set to [MAIN MENU] → [SWITCH MODE] → [FBC SETTING] → [FBC] → [ON].
6 Dynamic range stretcher display
This is displayed when the dynamic range stretcher function is active.
7 Auto gain control display
This is displayed when the auto gain control function is enabled.
8 Auto tracking white balance
This is displayed when the auto tracking white balance function is enabled.
9 Haze elimination function display
This is displayed when the haze elimination function is enabled.
10 ND filter display
Indicates the selected ND filter value.
f
[1]
f
[2]
f
[3]
f
[4]