Panasonic AK-SHB800G, Operating Manual, Page: 65 / 92

– 65 –
Chapter 4 Menu Operations — Menu list (AK-SHU800)
[HLG SETTING]
Item Description of settings
[BLACK GAMMA SW] — Enables/disables black gamma.
[OFF], [ON]
f
Factory setting: [OFF]
[MASTER BLACK
GAMMA]
Adjusts the gamma characteristic adjacent to black.
[ − 32]…[ + 32]
f
Factory setting: [0]
[R BLACK GAMMA] Adjusts the gamma characteristic of red adjacent to black to the master gamma.
[
−
32]…[
+
32]
f
Factory setting: [0]
[B BLACK GAMMA] Adjusts the gamma characteristic of blue adjacent to black to the master gamma.
[ − 32]…[ + 32]
f
Factory setting: [0]
[KNEE SW] — Enables/disables knee.
[OFF], [ON]
f
Factory setting: [ON]
[KNEE POINT] Sets the knee point position.
[60.00]…[100.00] (0.25 step)
f
Factory setting: [80.00]
[KNEE SLOPE] Sets the knee slope.
[00]…[199]
f
Factory setting: [130]
[PAINT (CROP)]
Adjust the HD images cropped (CROP) from 8K signals which are output from the <SDI OUT 1> to <SDI OUT 4> terminals when [MAIN MENU] →
[SYSTEM MODE] → [PIXEL] → [1080] is selected.
[CROP-1]
Item Description of settings
[GAIN] Sets the gain up volume for the signal output from the <SDI OUT 1> terminal.
[
−
3dB]…[3dB] (1dB step)
f
Factory setting: [0dB]
[CHROMA] [CHROMA LEVEL
SWITCH]
Enables/disables the gain adjustment of chroma included in the signal output from the <SDI OUT 1>
terminal.
[OFF], [ON]
f
Factory setting: [OFF]
[CHROMA LEVEL] Sets the gain adjustment of chroma included in the signal output from the <SDI OUT 1> terminal.
[ − 100%]…[40%]
f
Factory setting: [0%]
[MASTER DETAIL] Sets the master detail for the signal output from the <SDI OUT 1> terminal.
[
−
31]…[31]
f
Factory setting: [0]
[PEAK FREQUENCY] Sets the peak frequency of the horizontal detail for the signal output from the <SDI OUT 1> terminal.
[0]…[4]
f
Factory setting: [3]
[CROP-2]
Item Description of settings
[GAIN] Sets the gain up volume for the signal output from the <SDI OUT 2> terminal.
[ − 3dB]…[3dB] (1dB step)
f
Factory setting: [0dB]
[CHROMA] [CHROMA LEVEL
SWITCH]
Enables/disables the gain adjustment of chroma included in the signal output from the <SDI OUT 2>
terminal.
[OFF], [ON]
f
Factory setting: [OFF]
[CHROMA LEVEL] Sets the gain adjustment of chroma included in the signal output from the <SDI OUT 2> terminal.
[ − 100%]…[40%]
f
Factory setting: [0%]
[MASTER DETAIL] Sets the master detail for the signal output from the <SDI OUT 2> terminal.
[ − 31]…[31]
f
Factory setting: [0]
[PEAK FREQUENCY] Sets the peak frequency of the horizontal detail for the signal output from the <SDI OUT 2> terminal.
[0]…[4]
f
Factory setting: [3]