22
Preparation
Preparation
Mounting to the camera
Fig. 1
Fig. 2
Connector cover
V-shaped groove
Lock release button
V-shaped projection
1
Turn off the power of the camera and this unit.
2
Press the lock release button on the camera and remove the connector cover. (Fig. 1)
3
Align the V-shaped projection of this unit to the V-shaped groove on the camera, and slide and push in until it is locked. (Fig. 2)
Mounting and dismounting become easier by locking the pan lock lever and the lift friction knob on this unit.
Once the mounting is completed, confirm that this unit is securely mounted to the camera.
@
@
NOTE
t
Do not hold on the hood of this unit when mounting.
r
To dismount
1
Turn off the power of the camera and this unit.
2
Slide and dismount this unit while pressing the lock release button on the camera.
@
@
NOTE
t
Do not hold on the hood of this unit when dismounting.
