Panasonic AK-HVF100G, Operating Instructions Manual

Page: 19 / 36

Description of parts
19
Description of parts
Front
1
2
3
9
10
11
12
13
14
4 6 7 6 8
5 6 7 6 8
1 <F1>/<F2>/<F3>/<F4> buttons
A function can be assigned to each button by [MAIN MENU] → [FUNCTION] → [FUNCTION1] to [FUNCTION4].
The function assigned to each is operated by pressing the button. For details, refer to [FUNCTION] (page 31).
2 <POWER> lamp
The lamp (green) is illuminated when the power is turned on.
Turns off when set to [MAIN MENU]
→ [SYSTEM CONFIG] → [POWER LED] → [OFF1]/[OFF2].
3 <POWER> switch
This is the switch to turn on/off the power.
The power can be turned off by pressing this switch for two seconds or longer while the power is turned on.
4 Assignable tally lamp
This is illuminated with the condition set in [MAIN MENU] → [SYSTEM CONFIG] → [TALLY ASSIGN].
The brightness can be switched with [MAIN MENU] → [TALLY BRIGHT] → [FRONT TALLY] → [HIGH]/[MID]/[LOW].
5 <EXT> lamp
This is illuminated when the lens extender is used.
The brightness can be switched with [MAIN MENU]
→ [TALLY BRIGHT] → [FRONT TALLY] → [HIGH]/[MID]/[LOW].
6 Red tally lamp
This is illuminated when the red tally signal is input.
The brightness can be switched with [MAIN MENU]
→ [TALLY BRIGHT] → [FRONT TALLY] → [HIGH]/[MID]/[LOW].
7 Green tally lamp
This is illuminated when the green tally signal is input.
The brightness can be switched with [MAIN MENU]
→ [TALLY BRIGHT] → [FRONT TALLY] → [HIGH]/[MID]/[LOW].
8 Yellow tally lamp
This is illuminated when the yellow tally signal is input.
The brightness can be switched with [MAIN MENU]
→ [TALLY BRIGHT] → [FRONT TALLY] → [HIGH]/[MID]/[LOW].
9 <BRIGHT> knob
This adjusts the brightness of the image.
10 <CONTRAST> knob
This adjusts the contrast of the image.
11 <PEAKING> knob
This adjusts the contour correction of the image.
12 <SELECT> dial button
This is a dial button for menu screen operation.
The cursor will move down when the <SELECT> dial button is turned clockwise. The cursor will move up when turned counterclockwise.
To select a menu item, press the <SELECT> dial button.
Sets the function to assigned with [MAIN MENU]
→ [FUNCTION] → [ASSIGN].
13 <ADJ> lamp
The lamp (green) is illuminated during adjustment.
This is illuminated when [FUNCTION]
→ [ASSIGN] is set to anything other than [UNDEF].
14 <MENU> button
This switches on/off of the menu.
@ @ NOTE
t
The brightness for assignable tally lamp/<EXT> lamp/red tally lamp/green tally lamp/yellow tally lamp are switched simultaneously when the setting of
[FRONT TALLY] is changed.