
MECH-45
2-18. Tension Arm Unit
Replacement
(Removal)
1. Remove the Cut Washer (A) and hang off the
Tension Regulator Spring, and then remove the
Tension Arm Unit as shown in Figure 2-18.
(Installation)
1. Install the new Tension Arm Unit following the
removal steps in reveres order.
2. After installation, Tension Arm Adjustment should
be performed the following steps.
Figure 2-18
<Tension Arm Adjustment Flow Chart>
START
1-3. Tension Arm Offset Voltage Adjustment
1-5. Tension Arm PLAY Voltage Adjustment
1-4. Tension Arm Neutral Position
Adjustment
1-5. Tension Arm REV Voltage
Confirmation
NG
1-6. Tension Regulator Spring Adjustment
1-7. REV Tension Confirmation
& Screw Lock
NG
END
Summary of Contents for AJSDX900P - 24P DVCPRO 50
