Panasonic AJSDX900P - 24P DVCPRO 50, Service Manual, Page: 77 / 421

MECH-36
2-4. Adjustment Flow Chart After
Cylinder Unit Replacement
1. After change the Cylinder Unit, please perform
the adjustment and confirmation as following flow
chart.
NOTE:
Envelope level and PG Shifter adjustment
procedure are mentioned on Electrical Adjustment
Procedure.
Start Mechanical Adjustment
1-8. Tension Confirmation
1-16. A/C Head Tilt Confirmation
1-12. Post Limit Confirmation (PLAY)
1-11. Envelope Waveform Adjustment
1-18. A/C Head Azimuth & X-value Adjustment
1-17. A/C Head Height Confirmation
1-19. Compensation Adjustment of X-value
1-21. CTL Self-Recording Level Confirmation
1-23. Confirmation of Envelope on
REV,REW and FF mode
1-22.Play Tape Path Limit Confirmation
1-28. Confirmation of Tape Damage for Long Tape
Playback (SD VTR only)
1-27. Screw Lock Tight (A/C Head, T3 & T4 Post)
1-24. Confirmation of Play Start Envelope
1-25. & 1-26. Tape Path Limit Confirmation
(REV/REW/FF)
Note: PG Shifter Adjustment
Note: Envelope level Adjustment
1-29. LISTA Adjustment Procedure
1-30. LISTA Connection and Boot-up
1-32. LISTA Sensitivity Adjustment & Detection
1-33. Linearity Adjustment &
Waving Measurement
1-34. Self-REC/PLAY ENV Confirmation
END
EQ Adjustment
START Electrical Adjustment
REC CURR & REC FREQ Adj.
1-35. DV Playback ENV Confirmation
1-20. REV Tape path confirmation & Adjustment