Panasonic AJSDX900P - 24P DVCPRO 50, Service Manual, Page: 117 / 421

ELE-4
1-4. Instruction of Adjustment Software (EVR)
AJ-SDX900 (EVR) Adjustment Software is used for “2. CAMERA Section” and “4. VTR Section” .
There are “AJ-SDX900 Camera Adjustment Software” and “AJ-SDX900 VTR Adjustment Software” which are available on
the global service web site.
- CAUTION -
Before use the adjustment software, read “README” file which is included in the
adjustment software (CAMERA, VTR).
Starting EVR Adjustment
1. Execute the EXCEL file (“Cam_EVR.xls” or “Vtr_EVR.xls”).
2. Select model of adjustment on Select Menu dialog box as shown right.
3. Start adjustment using following instructions.
AJ-SDX900 EVR Software
AJ-SDX900 Camera Adj. Software
Model K96 Hontai Adj. Ver. SE
Step
SEND
RECEIVE
FCMT
item Adjustment
1 Int 27MHz Adjustment
2 VF Out Level Adjustment
3 Monitor Out Level Adjustment
4 Video Out Level Adjustment
5 Y Out Level Adjustment
6 Pb / Pr Out Level Adjustment
7 Color Framing Adjustment
8 Pluse Cancel Adjustment
9 Test Signal Level Adjustment
10 AD Level Fine Adjustment
11 Pre Knee Point Adjustment
12 Pedestal Adjustment
13 Pedestal Adjustment P mode
14 Pedestal Tracking VR Adjustment
15 Standard Sensivity Adjustment
16 Standard Sensivity Adjustment P mode
17 Sub Voltage Adjustment
18 Sub Voltage Adjustment P mode
19 Standard Sensitivity Fine Adjustment
20 Standard Sensitivity Fine Adjustment P mode
21 Pre Clip Voltage Adjustment
22 Pre Clip Voltage Adjustment P mode
23 Pre Clip Carrier Adjustment P mode
24 ATW Paramater Adjustment
25 Modulation Ratio Adjustment
26 White Shading Offset Adjustment 0dB
27 White Shading Offset Adjustment 18dB
28 White Shading Offset Adjustment 18dB 12dB
29 White Shading Adjustment Standard
30 White Shading Adjustment Extension Lens
31 White Shading Adjustment Converter Lens
32 Black Shading Adjustment
33 Flare Adjustment
34 Gamma Adjustment 0dB
35 Gamma Adjustment P mode 0dB
36 Gamma Adjustment 21dB
37 Gamma Adjustment P mode 21dB
38 ----------
39 ----------
40
41
42
43
44
45
46
47
48
49
50
Model selector
GO END
When click "GO" button, all adjustment
item are executed automatically.
Close the software.
Home position: When execute the software or all adjustments
are finished, the cursor is positioned here.
When click “enter” on the key board, start adjustment from item
1 to the end.
Status of the software
NORMAL 50I
NORMAL 25P
This Green color means activated adjustment item. When finish the adjustment
color is changed to sky blue. Then Click "ENTER" for next item.
It can select the item individually by mouse click.
Select the
MONITOR
OUT signal
Move the slider by mouse or click
both side buttons for adjustment
Key board operation for adjustment
Page Up : Decrease (Course)
Page Down : Increase (Course)
: Decrease (Regular)
: Increase (Regular)
: Decrease (Fine)
: Increase (Fine)
Forward to next step or adjustment
Pressing the "SPACE" key is available instead of clicking.
When click "CANCEL" button, adjustment data return to original value.
Pressing the "ESC" key is available instead of clicking.
Backward to previous step or adjustment
Pressing the "BS" key is available instead of clicking.