Panasonic AJSDX900P - 24P DVCPRO 50, Service Manual, Page: 109 / 421

MECH-68
7. Table of Connector.
2-1. Cylinder Unit Replacement
Connector (A) P613
P.C.Board (A) SERVO
Click this button , then go to item “2-1. Cylinder Unit Replacement” .
2-3. T1 Guide Position Adjustment
<No Tape loading procedure>
1. Press the “MENU button” pushing “HOLD button” and “LIGHT button” together so that “CAM SERVICE MENU”
screen is appears on VF and VIDEO OUT.
2. Press the “JOG DIAL button” to select the “VTR SERVICE MENU” (Menu display is change like below)
CAM SERVICE MENU
→
VTR SERVICE MENU
→
MAIN MENU
3. Rotate the “JOG DIAL button” to select the item “VTR SERVICE 2/3” in “VTR SERVICE MENU” screen and
press the “JOG DIAL button” to open the “VTR SERVICE 2/3” menu screen.
4. Select item “TENSION” rotating “JOG DIAL button” and press “JOG DOAL button”, then mechanism to set
loading complete condition.
Click this button , then go to item “2-3. T1 Guide Position Adjustment ” .
2-5. Supply & Take-up Reel Rotor Unit Replacement (In case of Camera Recorder)
Connector (A) P614
Connector (B) P615
P.C.Board (A) SERVO
Click this button , then go to item “2-5. Supply & Take-up Reel Rotor Unit Replacement (In case of
Camera Recorder)” .
2-6. Main Brake Torque Confirmation
<Specification>
Direction A Direction B
More than 0.8cN (more than 80gcm) More than 0.15cN (more than 15gcm)
Click this button , then go to item “2-6. Main Brake Torque Confirmation” .
2-10. Pinch Solenoid Replacement
Connector (A) P610
P.C.Board (A) SERVO
Click this button , then go to item “2-10. Pinch Solenoid Replacement” .
2-13. Loading Motor replacement
Connector (A) P611
P.C.Board (A) SERVO
Click this button , then go to item “2-13. Loading Motor replacement” .
2-14. Mode SW Unit Replacement
Connector (A) P612
P.C.Board (A) SERVO
Click this button , then go to item “2-14. Mode SW Unit Replacement ” .