Panasonic AJHPX2700G - MEMORY CARD CAMERA-RECORDER Operating Instructions Manual Download Page 132

Page: 132 / 206

132

Manipulating Clips with Thumbnails: Setting of Clip Meta Data

The unit allows you to check details of metadata read from
SD memory cards.

Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

Press the THUMBNAIL MENU button to select META
DATA

PROPERTY from the thumbnail menu. Then,

the screen like this is displayed:

Use the cursor buttons to move the pointer to the item
you wish to check, then press the SET button.

While viewing the settings for the metadata, use the
cursor buttons to move the pointer to the desired option.
Then, press the SET button. A soft keyboard screen is
displayed, allowing you to modify the setting.

Set “ON”/“OFF” in META DATA

RECORD from the

thumbnail menu. The factory setting is “OFF”.

Checking and modifying read metadata

To set whether or not the uploaded metadata is
recorded

AJ-HPX2700G-VQT1V27_eng.book 132 ページ２００８年９月２日　火曜日　午後５時４３分

Summary of Contents for AJHPX2700G - MEMORY CARD CAMERA-RECORDER















































































































































































































Search results

Summary of Contents for AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Reviews:

Panasonic AJHPX2700G - MEMORY CARD CAMERA-RECORDER, Operating Instructions Manual, Page: 132 / 206

Search results

Summary of Contents for AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Reviews: