103
8
8-2-6 LCD MONITOR
8-2-7 GENLOCK
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
BRIGHTNESS
–7
:
+0
:
+7
Adjust the LCD monitor brightness.
– C U F –
COLOR LEVEL –7
:
+0
:
+7
Adjust the LCD monitor chroma level.
– C U F –
CONTRAST
–7
:
+0
:
+7
Adjust the LCD monitor contrast.
– C U F –
BACKLIGHT
HIGH
NORMAL
Select whether or not to set the LCD monitor
brightness to always high.
HIGH:
Set to always high.
NORMAL:
The brightness changes
according to the BRIGHTNESS
setting.
– C U F –
SELF SHOOT
NORMAL
MIRROR
Select whether or not to change the LCD
monitor to mirror image.
NORMAL:
Do not change to mirror image.
MIRROR:
Change to mirror image.
– C U F –
ASPECT CONV. LT.BOX
SQUEEZE
Select a screen ratio for images displayed
on the LCD monitor.
LT.BOX:
Display images in the letter box
size.
SQEEZE:
Display images in the squeeze size.
<Note>
This item is enabled only when ASPECT
described in [8-2-1 SYSTEM MODE] is set
to16:9.
– C U F –
Items/
Data Saved
Adjustabl
e Range
Remarks
GENLOCK
INT
EXT
26P EXT
Switch the camera synchronising signal.
INT:
Synchronise with the internal reference
signal regardless of the reference
signal input to the GENLOCK IN
terminal.
EXT:
Synchronise with the reference signal
input to the GENLOCK IN terminal.
26P EXT:
Synchronizes to the signal input via the
26-pin connector.
– C U F E
H PHASE
COARSE
–50
:
+00
:
+50
Perform coarse phase adjustment for
horizontal hold when configuring a system.
– – – – –
H PHASE FINE –160
:
+000
:
+160
Perform fine phase adjustment for horizontal
hold when configuring a system.
<Note>
This adjustment simultaneously shifts the SC
phase.
– – – – –
SC PHASE
COARSE
0
1
:
3
Perform coarse SC PHASE adjustment when
GENLOCK is set.
– – – – –
SC PHASE
FINE
–75
:
+00
:
+75
Perform fine SC PHASE adjustment when
GENLOCK is set.
<Note>
When adjusting GENLOCK, please adjust H
PHASE first, and then adjust SC PHASE.
– – – – –
#,52:''PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧟㧞ᣣޓ᳓ᦐᣣޓඦᓟ㧡ᤨ㧞㧜ಽ
