Panasonic AJ- SPX800E, Operating Instructions Manual

Page: 96 / 118

96
8-3-4 LOW SETTING 8-3-5 MID SETTING
<Note>
The items indicated by „ are the setting items for PAINT MENU
SW(
„
) R/W in the <SD CARD R/W SELECT> screen. The items
without „ are the setting items for PAINT MENU LEVEL R/W.
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information.
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
„
MASTER
GAIN
–3dB
:
0dB
:
30dB
Select the master gain from –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27, or 30dB.
S C U F E
H.DTL LEVEL 00
:
17
:
63
Set H.DTL LEVEL.
S C U F E
V.DTL LEVEL 00
:
24
:
31
Set V.DTL LEVEL.
S C U F E
DTL CORING 00
:
02
:
15
Set DTL CORING.
S C U F E
H.DTL FREQ. 00
:
20
:
31
Set a frequency (DTL width) at which H.DTL
is added. The greater the value, the higher
the frequency (the narrower the DTL).
S C U F E
LEVEL
DEPEND. 0
1
:
5
Set LEVEL DEPEND.
No DTL is added to the portion whose
brightness is the setting value or less.
When the GAMMA MODE SEL item is set to
STD, each setting value represents
brightness levels, as follows: 0 = about 0%,
1 = about 4%, 2 = about 8%, 3 = about 12%,
4 = about 16%, 5 = about 20%.
S C U F E
MASTER
GAMMA 0.35
:
0.45
:
0.75
Set MASTER GAMMA in 0.01 steps.
S C U F E
BLACK
STRETCH –3
:
OFF
:
+3
Set the gamma curb for dark spots.
S C U F E
„ MATRIX
TABLE
OFF
A
B Select the colour correction table.
S C U F E
„ COLOR
CORRECT
ON
OFF Set the colour correction to ON or OFF.
S C U F E
Items/
Data Saved
Adjustable
Range
Remarks
„
MASTER
GAIN
–3dB
:
9dB
:
30dB
Select the master gain from –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27, or 30dB.
S C U F E
H.DTL LEVEL 00
:
14
:
63
Set H.DTL LEVEL.
S C U F E
V.DTL LEVEL 00
:
20
:
31
Set V.DTL LEVEL.
S C U F E
DTL CORING 00
:
03
:
15
Set DTL CORING.
S C U F E
H.DTL FREQ. 00
:
20
:
31
Set a frequency (DTL width) at which H.DTL
is added. The greater the value, the higher
the frequency (the narrower the DTL).
S C U F E
LEVEL
DEPEND.) 0
1
:
5
Set LEVEL DEPEND.
No DTL is added to the portion whose
brightness is the setting value or less.
When the GAMMA MODE SEL item is set to
STD, each setting value represents
brightness levels, as follows: 0 = about 0%,
1 = about 4%, 2 = about 8%, 3 = about 12%,
4 = about 16%, 5 = about 20%.
S C U F E
MASTER
GAMMA 0.35
:
0.45
:
0.75
Set MASTER GAMMA in 0.01 steps.
S C U F E
BLACK
STRETCH –3
:
OFF
:
+3
Set the gamma curb for dark spots.
S C U F E
„ MATRIX
TABLE
OFF
A
B Select the colour correction table.
S C U F E
„ COLOR
CORRECT
ON
OFF Set the colour correction to ON or OFF.
S C U F E