– 126 –
Chapter 6 Menu Operations — Menu list
Item
Description of settings
[HI-COLOR SW]
Turns the mode that expands the color dynamic range [ON]/[OFF].
[ON], [OFF]
f
Factory setting: [ON]
[HI-COLOR LVL]
Selects the level of the mode that expands the color dynamic range.
[1]…[32]
f
Factory setting: [32]
[WHITE CLIP SETTING] [WHITE CLIP]
Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LVL] setting value when the
function is [ON].
[ON], [OFF]
f
Factory setting: [ON]
[WHITE CLIP LVL]
Sets the white clip level.
[90%]…[109%]
f
Factory setting: [109%]
[Rch CLIP LVL]
Sets the clip level Rch for the white clips.
[
−
31]…[31]
f
Factory setting: [0]
[Bch CLIP LVL]
Sets the clip level Bch for the white clips.
[
−
31]…[31]
f
Factory setting: [0]
[DRS EFFECT DEPTH]
Sets the compression level of the high-brightness areas of the dynamic range stretcher function. By
compressing the video signal levels of the high-brightness areas that are blown out in normal shooting, the
dynamic range can be expanded.
[1], [2], [3]
f
Factory setting: [1]
[A.IRIS LEVEL]
Enables/disables the auto iris level function.
[ON], [OFF]
f
Factory setting: [ON]
[A.IRIS LEVEL EFFECT]
Adjusts the brightness in the auto iris mode. Increase the value to brighten, and decrease the value to
darken the convergence of auto iris.
[
−
50]…[50]
f
Factory setting: [0]
[SYSTEM MODE]
Configure the settings regarding the recording format of video and audio.
Item
Description of settings
[LINE&FREQ]
Sets the signal format of the camera. If this setting has been changed, select [YES] on a confirmation
message and restart the camera.
[1080-59.94i/P], [1080-50i/P], [1080-59.94i], [1080-50i], [1080-23.98PsF], [720-59.94P], [720-50P],
[480-59.94i], [576-50i]
[REC FORMAT]
Selects the codec for recording and the mode for shooting and recording.
[AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN], [AVC-I100/24PN],
[AVC-I100/25PN], [AVC-I50/60P], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i], [AVC-G50/60P],
[AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G50/30PN], [AVC-G50/24PN], [AVC-G50/25PN],
[AVC-G25/60P], [AVC-G25/60i], [AVC-G25/50P], [AVC-G25/50i], [AVC-G25/30PN], [AVC-G25/24PN],
[AVC-G25/25PN], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i], [AVC-G12/30PN],
[AVC-G12/24PN], [AVC-G12/25PN], [DVCPRO HD/60P], [DVCPRO HD/60i], [DVCPRO HD/50P],
[DVCPRO HD/50i], [DVCPRO50/60i], [DVCPRO50/50i], [DVCPRO/60i], [DVCPRO/50i], [DV/60i],
[DV/50i]
[CAMERA MODE]
Sets the camera shooting mode while in the SD mode.
[60i], [50i], [30P], [25P]
[AUDIO SMPL RES]
Selects the number of audio bits ([24BIT] or [16BIT]) when [REC FORMAT] is [AVC-I100] or [AVC-I50].
At [REC FORMAT] other than these, recording is performed at the number of audio bits fixed to 24 bits or
16 bits.
[16BIT], [24BIT]
f
Factory setting: [16BIT]
[REC SIGNAL]
Switches the input signal. At this time, SDI signal is output from the <SDI OUT/IN (OP)> terminal.
[CAM]:
Records the camera shooting signal of the camera.
[SDI]:
Records input signals from the <SDI OUT/IN (OP)> terminal.
f
Factory setting: [CAM]
Once the power is turned off, it is always set to [CAM] the next time power is turned on.
This menu item is displayed only when the HD/SD SDI input board AG-YA600G (optional) is attached.
[ASPECT CONV]
Selects the aspect ratio of the video to be recorded in 480i, 576i.
[SIDE CROP], [LETTER BOX], [SQUEEZE]
f
Factory setting: [SIDE CROP]
[SCAN REVERSE]
Enables/disables the scan reverse shooting function for vertical/horizontal inversion of images.
[ON], [OFF]
f
Factory setting: [OFF]
[SETUP]
Sets the setup level of 480i video signals.
[0%], [7.5%A]
