– 90 –
Chapter 4 Shooting — Dual codec recording
Error displays
(viewfinder screen)
Behavior and cause
Action to take
[SD WR ERR]
Proxy data recording to the SD memory card will stop, but
recording to the P2 card will continue.
This is displayed when proxy data cannot be recorded in the SD
memory card even when [PROXY REC(P2&SD)] is set in main
menu
→
[REC/PB]
→
[DUAL CODEC SETUP]
→
[CODEC
USAGE].
r
If the error message is displayed when recording
starts:
f
The SD memory card format is different.
f
The SD memory card contains 1000 clips or more.
f
An attempt is made to record to an SD memory card
containing data for updating the firmware of the camera.
r
If the error message is displayed during
recording:
f
The SD memory card was ejected during recording.
f
An error occurred in recording to the SD memory card.
Check the status of the SD memory card and insert a
[SD --min] or [SD WP]
Proxy data will not be recorded to the SD memory card, but
recording to the P2 card will be performed.
f
No SD memory card is inserted. [SD --min]
f
The SD memory card is write-protected. [SD WP]
Check the status of the SD memory card.
Copying proxy data to the SD memory card
1
Press the <THUMBNAIL MENU> button to display the thumbnail screen.
2
Use the cursor buttons to move the cursor to the clip to be copied, and press the <SET> button.
3
Press the <MENU> button.
4
Select [SD CARD] in the main menu
→
[CLIP]
→
[COPY].
5
Select [YES] in the confirmation message and press the <SET> button.
@
@
NOTE
t
If [SD END] is displayed and the proxy data being recorded to the SD memory card is deleted, perform this procedure to copy the proxy data from the
P2 card, and enable the deleted proxy data to be restored.
t
Source data is not copied.
