Panasonic AJ-PX5100G Page 177 Operating Instructions Manual Download

Page: 177 / 263

– 177 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[PB POSITION]

Sets the playback start position during playback from the thumbnail screen.

[RESUME]:

Plays back from the position where playback stopped.

[THUMBNAIL TC]:

Plays back from the time code of the thumbnail position.

[START TC]:

Plays back from the start time code (beginning of the clip).

Factory setting: [START TC]

[PROPERTY DISP.]

Sets simple properties item displayed on the left of the thumbnail when [SMALL] is selected for

[THUMBNAIL SIZE].

[USER CLIP NAME]:

Displays the user clip name.

[START TC]:

Displays the start time code.

[REC DATE]:

Displays the recorded date.

[REC TIME]:

Displays the record time.

[NUM. OF AUDIO CH]:

Displays the number of audio channels.

[AUDIO RATE]:

Displays the audio sampling rate.

[AUDIO BIT]:

Displays the audio bitrate.

[CREATOR]:

Displays the person who recorded the clip.

[SHOOTER]:

Displays the videographer.

[PLACE NAME]:

Displays the shooting location.

[PROGRAM NAME]:

Displays the program name.

[SCENE NO.]:

Displays the scene number.

[TAKE NO.]:

Displays the take number.

[REPORTER]:

Displays the reporter.

[PURPOSE]:

Displays the purpose of shooting.

[OBJECT]:

Displays the object of shooting.

[START UB]:

Displays the start user bits.

[REC RATE]:

Displays the recording frame rate.

[LAST UP DATE]:

Displays the date of last update.

[LAST UP PERSON]:

Displays the last person who updated.

[MANUFACTURER]:

Displays the equipment manufacturer name.

[SERIAL NO.]:

Displays the serial number.

[MODEL NAME]:

Displays the model name.

[ALTITUDE]:

Displays an altitude.

[LONGITUDE]:

Displays a longitude.

[LATITUDE]:

Displays a latitude.

[1ST TEXT MEMO]:

Displays the first text memo content.

[THUMBNAIL OFFSET]:

Displays the thumbnail recording position.

Factory setting: [USER CLIP NAME], [START TC], [REC DATE], [NUM. OF AUDIO CH], [AUDIO BIT]

A maximum of 6 items can be displayed at the same time.

When 6 items are already selected, all unchecked items cannot be selected.

You can change your item selection by unchecking selected items.

Items with underlines are selected in the factory settings.

[INFORMATION SEL.]

Selects to display the thumbnail information such as the number of selected clips or playback time of the

clip, or to display the information of the bonding device.

[THUMBNAIL INFO.]:

Displays the thumbnail information such as the number of selected clips or playback

time of the clip.

[BONDING DEV. INFO.]:

Displays the information of the bonding device.

Factory setting: [THUMBNAIL INFO.]

[THUMBNAIL INFO.]

Displays the number of selected clips and playback time of clip, etc.

[NUM. OF CLIPS]:

Displays the number of selected clips.

[DUR. OF SEL CLIPS]:

Displays the total playback time of selected clips.

[TOTAL DURATION]:

Displays the total playback time of the displayed clip.

Factory setting: [NUM. OF CLIPS]

[TEXT MEMO IND]

Sets the display mode of the text memo indicator displayed for clips on the thumbnail screen.

[ALL]:

Displays the indicator for all clips with text memos attached.

[HIDE CARD SERIAL]:

Hides the text memo indicator for clips with only the following types of text memos

attached.

Text memo with the serial number of card written

Other text memos for which offset is not set with clip metadata

To record a text memo with the serial number of card written as metadata, set the main menu

→

[REC/PB]

→

[REC META DATA]

→

[CARD SERIAL] to [ON].

Check [OFFSET] of [MEMO] on the clip properties screen to see whether offset is set for a text memo.

Factory setting: [ALL]

[STORAGE COPY SETUP]

Item

Description of settings

[VERIFY]

Sets whether to verify or not when exporting in USB storage mode.

[ON]:

Verifies.

[OFF]:

Does not verify.

Factory setting: [ON]

Valid for use in storing to type S format only.

Summary of Contents for AJ-PX5100G








































































































































































































































































Search results

Summary of Contents for AJ-PX5100G

Reviews:

Related manuals for AJ-PX5100G

Brands by name

Popular brands

Panasonic AJ-PX5100G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX5100G

Reviews:

Related manuals for AJ-PX5100G

Brands by name

Popular brands