– 131 –
Chapter 5 Playback — Thumbnail operations
3
To select additional clips, repeat steps 1 to
It is possible to display only the selected clips on the thumbnail screen for playback.
@
@
NOTE
t
While holding down the <SHIFT> button, use the cursor buttons (
`
/
{
) to move the cursor to the first or last clip.
t
After selecting a clip, move the cursor to another clip and press the <SHIFT> button
+
<SET> button to select all clips from the previously selected clip
to the cursor position.
t
As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1
Move the cursor to the selected clip and press the <SET> button.
This deselects the clip.
@
@
NOTE
t
While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.
Thumbnail screen display settings
You can customize the thumbnail screen according to usage.
Setting example for thumbnail screen ([INDICATOR])
1
Select [THUMBNAIL SETUP] in the main menu
→
[CLIP].
The thumbnail setting items ([INDICATOR], [DATA DISPLAY], [THUMBNAIL SIZE], [PB POSITION], [PROPERTY DISP.], [THUMBNAIL INFO.],
[TEXT MEMO IND]) are displayed. For details, refer to “[THUMBNAIL SETUP]” (page 176).
Setting thumbnails to be displayed
You can customize the types of clips displayed in the thumbnail screen.
1
Select [REPOSITION] in the main menu
→
[CLIP].
2
Move the cursor to the type of the clip you want to display using the cursor buttons.
3
Press the <SET> button.
Thumbnail size settings
You can customize the thumbnail size.
1
Select [THUMBNAIL SIZE] in the main menu
→
[CLIP]
→
[THUMBNAIL SETUP].
2
Move the cursor to the type of the clip you want to display using the cursor buttons.
3
Press the <SET> button.
Setting the clip information display
You can customize the clip information display contents according to your preference.
1
Select [DATA DISPLAY] in the main menu
→
[CLIP]
→
[THUMBNAIL SETUP].
2
Place the cursor on the item you want to set using the cursor buttons.
3
Press the <SET> button.
