– 45 –
Chapter 3 Recording and Playback — Dual codec recording
Item
Description of settings
[STREAMING LATENCY]
Sets the delay mode during the streaming distribution. This setting is used when the streaming distribution
is started from the operation of the camera.
This can be set when the main menu
→
[I/F SETUP]
→
[USB/LAN]
→
[STREAMING SETTING]
→
[START
TRIGGER] is set to [CAMERA].
[NORMAL]:
Set if you want to emphasize the stability of streaming.
[SHORT]:
Set if you want to emphasize the reduction of streaming delay.
f
Factory setting: [NORMAL]
f
Proxy data cannot be recorded in the following modes.
-
Interval recording (including one-shot recording)
-
Loop recording
-
When [ONE FILE] is set in the main menu
→
[REC/PB]
→
[REC/PB SETUP]
→
[FILE SPLIT].
-
When [ON] is set in the main menu
→
[REC/PB]
→
[REC FUNCTION]
→
[SIMUL REC].
-
When [ON] is set in the main menu
→
[REC/PB]
→
[REC FUNCTION]
→
[ONE CLIP REC].
Checking the setting status
By pushing the <MODE CHECK/MENU CANCEL> switch on the camera towards the <MCK/MCL> side three times, you can check the menu values of
the superimposition settings of the recording media, recording mode, and time code display of proxy data through mode check.
Recording modes and recording signals (video/audio)
r
Video
Recording mode
File format
Resolution
Codec
Frame rate
Bitrate
[STD 2CH MP4]
MP4
320
×
240 (QVGA)
MPEG-4
Simple Profile
30 fps/24 fps/25 fps
1500 kbps
[LOW 2CH MOV]
MOV
1080i mode
480
×
270
H.264
Baseline Profile
30 fps/25 fps
800 kbps
1080/59.94P mode
320
×
180
1080/50P mode
320
×
180
60 fps/50 fps
480/59.94i mode
352
×
240
576/50i mode
352
×
288
30 fps/25 fps
[HQ 2CH MOV]
MOV
640
×
360
H.264
High Profile
30 fps/25 fps
1500 kbps
[HQ 4CH MOV]
MOV
640
×
360
H.264
High Profile
30 fps/25 fps
1500 kbps
[SHQ 2CH MOV]
MOV
960
×
540
H.264
High Profile
30 fps/25 fps
3500 kbps
[AVC-G6 2CH
MOV]
MOV
1080i mode
1920
×
1080
720P mode
1280
×
720
H.264
High Profile
60 fps/50 fps
6 Mbps*
* When the recording mode is 720/30P, 720/25P, or 720/24P in [AVC-G6 2CH MOV], bitrate is 3 Mbps.
r
Audio
Recording mode
File format
Codec
Number of channels
Bitrate per channel
Sampling frequency
[STD 2CH MP4]
MP4
AAC-LC
2ch
64 kbps
24 kHz
[LOW 2CH MOV]
MOV
AAC-LC
2ch
64 kbps
48 kHz
[HQ 2CH MOV]
MOV
AAC-LC
2ch
64 kbps
48 kHz
[HQ 4CH MOV]
MOV
AAC-LC
4ch
64 kbps
48 kHz
[SHQ 2CH MOV]
MOV
LPCM
2ch
768 kbps
48 kHz
[AVC-G6 2CH
MOV]
MOV
AAC-LC
2ch
64 kbps
48 kHz
Recording the proxy data
Select [PROXY REC(P2)] or [PROXY REC(P2&SD)] in main menu
→
[REC/PB]
→
[DUAL CODEC SETUP]
→
[CODEC USAGE] and press the <REC>
button to start proxy recording at the same time as recording of the materials.
Push the <MODE CHECK/MENU CANCEL> switch towards the <MCK/MCL> side three times to display the proxy data recording information on the
viewfinder screen.
Recording to the SD memory card
To record the proxy data, use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. For the latest information not included in these
Operating Instructions, refer to the support desk at the following website.
http://pro-av.panasonic.net/
When recording the proxy data to an SD memory card, always format the card using the camera.