– 27 –
Chapter 2 Description of Parts — Description on display window
Description on display window
2
1
3
r
P2 card, battery charge level, audio level display
1 Media remaining space indicator bar
Indicates the remaining free space in the P2 card using a 7-segment display.
The P2 card remaining time indicated by a single segment is set in three or five minutes in the main menu
→
[I/F SETUP]
→
[BATTERY/P2CARD]
→
[CARD REMAIN/Seg]. Segments go out one segment at a time at each preset time.
2
Battery charge level indicator bar
When a battery with a digital indication (% indication) is used, all seven segments up to the [F] position light if the battery charge level is 70% or
higher.
When the battery charge level falls below 70%, the segments go out one by one for each 10% drop. When set [100%] in the main menu
→
[I/F
SETUP]
→
[BATTERY/P2CARD]
→
[BATT REMAIN FULL], seven segments can be set to light at 100%.
3 Audio channel level meter
When the audio channel selector switch is set to <CH1/2>, audio channel display numbers 1 and 2 are displayed, and the audio level of CH1 and
CH2 is displayed. When <CH3/4> is set, audio channel display numbers 3 and 4 are displayed, and the audio level of CH3 and CH4 is displayed.
5
4
r
Memory operation/status related display
4 Error code display (page 247)
5 Information display
[LOOP]
Lights during loop recording, and flashes during recording standby. (page 39)
6
7
6
Time code indications
[NDF]
Indicates when the time code is in the non-drop frame mode.
[DF]
Indicates when the time code is in the drop frame mode.
[SLAVE]
Indicates when the time code is externally locked.
[HOLD]
Indicates when the time code generator/read value is held.
[CTL]
Lights when <CTL> is selected by the <DISPLAY> switch and the CTL count value is displayed.
[TCG]
Lights when <TC> (or <UB>) is selected by the <DISPLAY> switch and the TC (or UB) generator value is displayed.
[TC]
Lights when <TC> (or <UB>) is selected by the <DISPLAY> switch and the TC (or UB) reader value is displayed.
[VTCG]
Lights when <UB> is selected by the <DISPLAY> switch and the VIUB generator value is displayed.
[VTC]
Lights when <UB> is selected by the <DISPLAY> switch and the VIUB reader value is displayed.
[TIME]
Lights when <UB> is selected by the <DISPLAY> switch and the real time hours/minutes/seconds value is displayed.