Panasonic AJ-PX5000G Operating Instructions Manual Download Page 146

Page: 146 / 260

– 146 –

Chapter 7 Menu Operations — Setting menu structure

Setting menu structure

Menu types and how to open them

Menu type

Use

How to open

[USER MENU]

In the main menu

→

[USER MENU SEL], you can select the desired items and

pages and register to [USER MENU]. You can select them depending on the

purpose or frequency of use to make a unique menu structure.

For details, refer to “Setting [USER MENU]” (page 148).

Displayed by pressing the <MENU>

button.

Main menu

You can set all items in the setting menu.

The main menu has a structure of categorized layers according to intended use

and setting frequency.

Displayed by pressing and holding the

<MENU> button for three seconds or

more.

[OPTION MENU]

Menu items are prepared to take into account additional functions in the future.

Please consult your vendor for more details.

Displayed by pressing the <MENU>

button while pressing and holding the

<LIGHT> button.

Main menu structure

[PAINT]

These are items for performing fine image adjustments while monitoring the output waveform of the camera using the

waveform monitor. You will need support from video engineers to use configure these settings.

These menu item settings are enabled when using the camera as a standalone device.

These menu items can be set from an external remote controller.

These menu items cannot be set when the thumbnail screen is displayed.

[VF]

These items are shown when selecting contents to show in the viewfinder screen.

These menu items cannot be set when the thumbnail screen is displayed.

[CAMERA]

These are items for changing the settings based on the condition of subject when the camera is operated.

These menu items cannot be set when the thumbnail screen is displayed.

[CLIP]

These items are used when performing various tasks, such as playing back, deleting, and copying clips, and editing

metadata, while checking the thumbnail of the clips displayed in the LCD monitor.

These menu items are enabled when the thumbnail screen is displayed.

Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.

Some items are displayed only in specific situations such as in USB storage mode or on the explorer screen.

[REC/PB]

These are various types of setting items when performing camera recording and playback.

[I/F SETUP]

These are items for setting related to audio and video input/output and display, and setting battery, audio, video output,

etc.

[FILE]

These are items for performing file-related operations such as reading from an SD memory card containing menu

settings data, and handling lens files and lens chromatic aberration correction (CAC) files.

These menu items cannot be set when the thumbnail screen is displayed or during playback.

[MAINTENANCE]

These are items for performing maintenance inspection of the camera.

These menu items cannot be set when the thumbnail screen is displayed.

[SYSTEM]

These items are used for checking and updating the camera’s firmware version.

Set the system frequency, the number of lines, and recording format.

[USER MENU SEL]

This menu is used to set the items to be displayed in [USER MENU].

For details on items that can be set, refer to “Setting items to [USER MENU] and loading/reading the settings to a data

file” (page 192).

[OPTION MENU] structure

[OPTION]
[AREA SETTING]

Summary of Contents for AJ-PX5000G





































































































































































































































































Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands

Panasonic AJ-PX5000G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands