Panasonic AJ-PX270EJ Operating Instructions Manual Download

Page: 130 / 190

– 130 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[DATA DISPLAY]

Selects the content to be displayed in the time code display area.

[TC]:

Displays the time code.

[UB]:

Displays the user bits.

[TIME]:

Displays the record time.

[DATE]:

Displays the record date.

[DATE TIME]:

Displays the record date and time.

[CLIP NAME]:

Displays clip names.

[USER CLIP NAME]:

Displays a maximum of the first 15 letters (for an English language display) of a user

clip name.

[SLOT]:

Displays slot number.

[THUMBNAIL TC]:

Displays the time code of the thumbnail position.

Factory setting: [TC]

[THUMBNAIL SIZE]

Sets the thumbnail size displayed in a thumbnail on the screen.

[SMALL]:

Small (thumbnail display: with 4

3 and property display)

[MEDIUM]:

Standard (thumbnail display: 4

[LARGE]:

Large (thumbnail display: 3

Factory setting: [MEDIUM]

[PB POSITION]

Sets the playback start position during playback from the thumbnail screen.

[RESUME]:

Plays back from the position where playback stopped.

[THUMBNAIL TC]:

Plays back from the time code of the thumbnail position.

[START TC]:

Plays back from the start time code (beginning of the clip).

Factory setting: [START TC]

[PROPERTY DISP.]

Sets simple properties item displayed on the left of the thumbnail when [SMALL] is selected for

[THUMBNAIL SIZE].

[USER CLIP NAME]:

Displays the user clip name.

[START TC]:

Displays the start time code.

[REC DATE]:

Displays the recorded date.

[REC TIME]:

Displays the recorded time.

[NUM. OF AUDIO CH]:

Displays the number of audio channels.

[AUDIO RATE]:

Displays the audio sampling rate.

[AUDIO BIT]:

Displays the audio bitrate.

[CREATOR]:

Displays the person who recorded the clip.

[SHOOTER]:

Displays the videographer.

[PLACE NAME]:

Displays the shooting location.

[PROGRAM NAME]:

Displays the program name.

[SCENE NO.]:

Displays the scene number.

[TAKE NO.]:

Displays the take number.

[REPORTER]:

Displays the reporter.

[PURPOSE]:

Displays the purpose of shooting.

[OBJECT]:

Displays the object of shooting.

[START UB]:

Displays the start user bits.

[REC RATE]:

Displays the recording frame rate.

[LAST UPDATE]:

Displays the date of last update.

[LAST UP PERSON]:

Displays the last person who updated.

[MANUFACTURER]:

Displays the equipment manufacturer name.

[SERIAL NO.]:

Displays the serial number.

[MODEL NAME]:

Displays the model name.

[ALTITUDE]:

Displays an altitude.

[LONGITUDE]:

Displays a longitude.

[LATITUDE]:

Displays a latitude.

[1ST TEXT MEMO]:

Displays the first text memo content.

[THUMBNAIL OFFSET]:

Displays the thumbnail recording position.

[STORAGE COPY

SETUP]

[VERIFY]

Sets whether to verify or not when exporting in USB host mode.

[ON]:

Verifies.

[OFF]:

Does not verify.

[AUDIO SETUP]

Configure the settings regarding audio input/output.

Item

Description of settings

[INPUT SETTING]

[INT MIC]

Sets built-in microphone on/off and selects the directionality.

[STEREO]:

Records audio from two directions in the front with the stereo microphone.

[MONO]:

This mode records clearer audio from the front by enhancing the directionality forward like a

shotgun microphone. Audio recorded on the left and right are the same.

[OFF]:

Disables audio of the built-in stereo microphone.

Factory setting: [STEREO]

[INPUT1 MIC LEVEL]

Sets the level of an external microphone connected to the <AUDIO INPUT 1> terminal. Enabled only when

a microphone is connected.

[

−

40dB], [

−

50dB], [

−

60dB]

Factory setting: [

−

50dB]

[INPUT2 MIC LEVEL]

Sets the level of an external microphone connected to the <AUDIO INPUT 2> terminal. Enabled only when

a microphone is connected.

[

−

40dB], [

−

50dB], [

−

60dB]

Factory setting: [

−

50dB]

Summary of Contents for AJ-PX270EJ































































































































































































Search results

Summary of Contents for AJ-PX270EJ

Reviews:

Related manuals for AJ-PX270EJ

Brands by name

Popular brands

Panasonic AJ-PX270EJ, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX270EJ

Reviews:

Related manuals for AJ-PX270EJ

Brands by name

Popular brands