– 125 –
Chapter 6 Menu Operations — Menu list
[SW MODE]
Configure the settings of each mode when switched using each switch.
These menu items cannot be set when the thumbnail screen is displayed.
Item
Description of settings
[LOW GAIN]
Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[
−
3dB]…[18dB]
f
Factory setting: [0dB]
[MID GAIN]
Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[
−
3dB]…[18dB]
f
Factory setting: [6dB]
[HIGH GAIN]
Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[
−
3dB]…[18dB]
f
Factory setting: [12dB]
[SUPER GAIN]
Sets the super gain to be assigned to the USER button.
[24dB], [30dB], [36dB]
[ALL]:
Each time the USER button is pressed, the camera toggles [24dB]
→
[30dB]
→
[36dB]
→
(off) in
order.
f
Factory setting: [36dB]
[OIS]
Enables/disables the image stabilizer function.
[ON]:
Enables the image stabilizer function.
[OFF]:
Disables the image stabilizer function.
f
Factory setting: [ON]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
[ATW]
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
[Ach], [Bch], [PRE], [OFF]
f
Factory setting: [OFF]
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
[FAST], [NORMAL], [SLOW]
f
Factory setting: [NORMAL]
[ATW TARGET R]
Finely adjusts the Rch output for convergence with auto tracking white balance operation.
[
−
10]…[10]
f
Factory setting: [0]
[ATW TARGET B]
Finely adjusts the Bch output for convergence with auto tracking white balance operation.
[
−
10]…[10]
f
Factory setting: [0]
[W.BAL PRESET]
Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
[3200K], [5600K], [VAR]
f
Factory setting: [3200K]
[W.BAL VAR]
Sets the value of [VAR] in [W.BAL PRESET].
It can also be operated by the <SEL/PUSH SET> dial button.
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
[2000K]…[15000K]
f
Factory setting: [3200K]
[H.ZOOM SPEED]
Sets the zoom speed when the HANDLE ZOOM switch is <FIX>.
[1]…[99]
f
Factory setting: [50]
[PUSH AF MODE]
Assigns the operation mode when the <PUSH AUTO> button is pressed.
[TURBO]:
Performs high-speed focusing automatically until the image is focused, once the button is
pressed.
[NORMAL]:
Performs automatic focusing while pressing the button.
f
Factory setting: [TURBO]
[MF ASSIST]
Sets whether to adjust the last focus automatically when in the manual focus mode.
[ON]:
Adjusts the last focus automatically.
[OFF]:
Does not adjust the focus automatically.
f
Factory setting: [OFF]
If the image is largely out of focus, the focus may not be adjusted properly.
Operations with a remote control connected to the <CAM REMOTE> terminal are not available.
[FOCUS ASSIST MODE]
Sets the operation mode of the focus assist function.
[EXPAND]:
Expands the center part of the screen of the LCD monitor.
[IN RED]:
Outlines the contour of the video in red.
f
Factory setting: [EXPAND]
If functions are assigned to the USER buttons, on and off of the function can be switched using the USER
button operations.
[MACRO]
Enables/disables the focus macro function.
[ON]:
Enables the focus macro function.
[OFF]:
Disables the focus macro function.
f
Factory setting: [ON]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
[MACRO MODE]
Sets the operation mode when the focus macro function is enabled.
[TELE OFF]:
Does not use the tele macro area.
[ALL OFF]:
Does not use all of the macro area.
f
Factory setting: [TELE OFF]
