Panasonic AJ-PX230 Series, Operating Instructions Manual

Page: 111 / 169

– 111 –
Chapter 5 Playback — Thumbnail operations
r
[TYPE2]
Status of clip metadata [USER CLIP NAME] to be recorded
When clip metadata has been loaded Uploaded data + [COUNT] value*
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [CLIP NAME]
* The [COUNT] value is indicated as a four-digit number.
The [COUNT] value is incremented each time a new clip is generated, if the clip metadata has been loaded and [TYPE2] has been selected as the recording
method.
The [COUNT] value can be reset using the following method.
When you select [PROPERTY] in the main menu
→ [RECORDING SETUP] → [REC META DATA] and then select [USER CLIP NAME], the following screen is
displayed. Move the cursor over [COUNT RESET], and press the control stick to reset the [COUNT] value to 1.
Selecting the [CARD SERIAL] recording
A function to record the serial number of the microP2 memory card to the metadata (a text memo without offset) is enabled by selecting [ON] in the main
menu
→ [RECORDING SETUP] → [REC META DATA] → [CARD SERIAL].
Initializing the metadata setting
Select [INITIALIZE] in the main menu → [RECORDING SETUP] → [REC META DATA] and press the control stick. Select [YES] when the confirmation
screen is displayed.
The settings in the main menu
→ [RECORDING SETUP] → [REC META DATA] and later items, including loaded metadata, are initialized.
Setting metadata display language
Set the language when displaying metadata. Select [LANGUAGE] in the main menu → [RECORDING SETUP] → [REC META DATA], then select the
display language, and press the control stick.
When you select [NTSC (J)] as a region of use, you can choose either [ENGLISH] or [JAPANESE].
@ @
NOTE
t
Characters that cannot be displayed in English are not displayed properly but are displayed as “
*
”.
t
Only alphanumeric characters can be entered.
Formatting the microP2 memory card
1
Select [FORMAT] in the main menu → [CLIP].
f
Select the slot number where the microP2 memory card to be formatted is inserted, and press the control stick.
f
Select [EXIT] when you do not wish to format the card.
2
Select [YES] using the control stick.
The selected microP2 memory card is formatted.
@ @ NOTE
t
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
t
If the CPS password has been set, the confirmation message whether to select the encrypted format [CPS(ENCRYPT)] or normal format [NORMAL] is
displayed when selecting a slot. When the encrypted format is selected, the microP2 memory card is encrypted.
Formatting SD memory cards
SD memory cards can also be formatted in the thumbnail screen. With an SD memory card inserted into the camera, perform the following operation.
1
Select [FORMAT] in the main menu → [CLIP].
f
Select [SD CARD] and press the control stick.
f
Select [EXIT] when you do not wish to format the card.
2
Select [YES] using the control stick.
The SD memory card is formatted.