Panasonic AJ-HPM100E Operating Instructions Manual Download

Page: 111 / 152

Setup: Item Settings

111

S
e

This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12

and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other

displays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock.

* An underlined

setting

indicates an initial value.

BASIC

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

001

LOCAL ENA

0000

0001

0002

DIS

STOP

ENA

Restricts the number of buttons on the key panel that are available when the CONTROL

switch is set to REMOTE.

0: No buttons are available.

1: Only the STOP button is available.

2: All buttons are available.

002

CTL DISP

0000

0001

12h

24h

Switches the CTL counter display between 12 and 24-hour clock display.

0: 12-hour clock display

1: 24-hour clock display

003

REMAIN SEL

0000

0001

0002

0003

OFF

R/TTL

Specifies whether to display the remaining time or total time via the VIDEO MON connector

and via superimposed display of the LCD panel.

0: No display.

1: Displays remaining media time on the second line.

2: Displays remaining media time on the first line.

3: Displays the remaining media time on the first line and total media time on the second

line.

NOTE:

• These functions are not displayed when “2L” is selected and “TIME” is set in setup

menu No. 006 (DISPLAY SEL).

• Total tape time is not displayed when “R/TTL” is selected and “TIME” is set in setup

menu No. 006 (DISPLAY SEL).

006

DISPLAY SEL

0000

0001

0002

0003

0004

0005

0006

0007

0008

0009

TIME

T&STA

T&S&M

T&RT

T&YMD

T&MDY

T&DMY

T&UB

T&CTL

T&T

Specifies the output of the VIDEO MON connector or what is displayed in the

superimposed display of the LCD panel.

Here, “data” indicates the CTL/TC/UB value selected with the COUNTER button.

0: Data only

1: Data and operating status

2: Data, operating status and mode

3: Data and REC TIME

4: Data and REC DATE (year/ month/day)

5: Data and REC DATE (month/day/year)

6: Data and REC DATE (day/month/year)

7: Data and user bit

However, when UB is selected with the COUNTER button, the time code is indicated after

the user bit.

8: Data and CTL

However, when CTL is selected with the COUNTER button, the time code is indicated after

CTL data.

9: Data and time code

NOTE:

An error message appears in the superimposed display if a warning or error occurs

when T&S&M is selected.

007

CHARA H-POS

0000

0004

0016

Specifies the horizontal character position output via the VIDEO MON connector or

displayed in the superimposed display of the LCD panel.

Summary of Contents for AJ-HPM100E

























































































































































Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands

Panasonic AJ-HPM100E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands