Panasonic AJ-HPM100E Operating Instructions Manual Download

Page: 104 / 152

104

Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards

Using SD/SDHC Memory Cards

This unit supports SD/SDHC memory cards.

◆

NOTE:

• Current SETUP menu settings can be saved to and loaded from an

SD memory card. For details, refer to page 128.

Use the following procedure to display SD memory card

status on screen for checking.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to choose [PROPERTY] –

[DEVICE] – [SD CARD] and press the SET button.

The following information may also appear depending on

card status.

• This unit cannot record proxies.

Press the SET button and the MENU button to end

processing.

Use the following procedure to format an SD memory card

inserted in an SD memory card slot.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to select [OPERATION] –

[FORMAT] – [SD CARD].

Select [YES] and press the SET button.

The card is now formatted.

◆

NOTE:

• To cancel formatting, select [NO] and press the SET button.

Press the SET button (check) when the completion

message appears.

Displaying Miscellaneous SD
Memory Card Information

SD STANDARD:

Indicates that an SD memory

card is formatted according to

the SD/SDHC standard.

SUPPORTED: Complies with SD/

SDHC

NOT SUPPORTED: Does not

comply with SD/SDHC

USED:

Used capacity (bytes)

BLANK:

Free space (bytes)

TOTAL:

Total capacity (bytes)

NUMBER OF CLIPS:

The number of clips on an SD

memory card when clips have

been copied to an SD memory

card using a proxy or a P2

camera recorder.

PROTECT:

Write protected

Formatting SD Memory Cards

Summary of Contents for AJ-HPM100E

























































































































































Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands

Panasonic AJ-HPM100E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands