Chapter 2 Parts and their functions
2
17
5
1
2
4
3
6
2-6 Warning/status display section
2-7 Display window and its displays
Remaining tape and remaining battery charge and
audio channel level displays
Displays relating to the VTR unit’s operations and
modes
CTL
RF SERVO HUMID SLACK
h
TAPE
E
B
Y
minM
s
frm
13
24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD
GPS
BATT
E
F
OVER
OVER
10
OO
40
-dB
30
18
Remaining tape display
The remaining tape time is displayed using 7 segments.
The remaining tape time indicated by each segment is set to 3 minutes or 5
minutes using TAPE REMAIN/
∫
on the VTR MENU “BATTERY/TAPE”
screen. Each time the number of minutes set for the segments elapses, one
segment is cleared.
Remaining battery charge display
If a battery with a digital display (% display) is used, all 7 segments up
to the “F” position light when the 70% or more of the battery charge
remains.
When there is less than 70% of the battery charge remaining, the
segments go out one by one in sequence every time the remaining
charge drops by 10%. It is also possible to set all 7 segments to light at
a 100% battery charge by selecting 100% as the setting for BATT
REMAIN FULL on the <BATTERY/TAPE> screen of the VTR menu.
Audio channel level meter
When the MONITOR SELECT CH1/2
O
CH3/4 switch is set to CH1/2,
numbers 1 and 2 indicating the audio channels appear, and the CH1
and CH2 audio levels are displayed. Conversely, when it is set to
CH3/4, numbers 3 and 4 indicating the audio channels appear, and
the CH3 and CH4 audio levels are displayed.
CTL
RF SERVO HUMID SLACK
h
TAPE
E
B
Y
minM
s
frm
13
24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD
GPS
BATT
E
F
OVER
OVER
10
OO
40
-dB
30
18
Error code display
(for details, refer to “6-3 Warning system”)
Warning displays
RF:
Clogged video head
SERVO:
Servo disturbance
HUMID:
Formation of condensation on the head drum
SLACK:
Problem in tape take-up
For details, refer to “6-3 Warning system.”
1
Back tally lamp
When the back tally switch
2
is set to ON, this lamp
serves the same function as the front tally lamp in the
viewfinder.
2
Back tally switch
This is used to control the unit’s back tally lamp
1
and rear
tally lamp
6
.
ON
:
The back tally lamp and rear tally lamp operate.
OFF :
The back tally lamp and rear tally lamp do not
operate.
3
WARNING lamp
When a problem of some form or other occurs within the
VTR unit, this lamp flashes or lights.
4
LIGHT switch
This controls the lighting of the display window.
Each time it is pressed, the lighting of the display window
5
is set in turn from on to off or vice versa.
5
Display window
This displays the alarms, remaining battery charge, audio
levels, time data, etc. relating to the VTR unit.
6
Rear TALLY lamp
When the back tally switch
2
is set to ON, this lamp
operates in exactly the same way as the back tally lamp.
01.AJ-HDX400E(VQT0P57)E 05.1.20 15:50 ページ17
