Panasonic AJ-CX4000G, Operating Instructions Manual

Page: 47 / 221

– 47 –
Chapter 3 Preparation — Setting the date/time of the internal clock
Setting the date/time of the internal clock
The date/time and time zone are recorded as metadata in the content (clip) while shooting. The date/time metadata will affect the playback order by the
thumbnail.
Always check and set the date/time and time zone before using the camera.
Do not change the setting of the date/time and time zone while shooting.
1
Press the <MENU> button.
The menu is displayed.
2
Select the [OTHERS] menu → [CLOCK] → [TIME ZONE] and set the time difference from the Greenwich Mean Time.
3
Select the [OTHERS] menu → [CLOCK] → [CLOCK SETTING] and set the year, month, date, and time.
@ @
NOTE
t The accuracy of the clock is approximately ±30 seconds per month. Check and reset the time when accurate time is required.
r Time zone table
Time difference Region Time difference Region
00:00 Greenwich
+ 01:00 Central Europe
− 00:30 + 01:30
− 01:00 Azores + 02:00 Eastern Europe
− 01:30 + 02:30
− 02:00 Mid-Atlantic + 03:00
Moscow
− 02:30 + 03:30 Tehran
− 03:00 Buenos Aires + 04:00 Abu Dhabi
− 03:30 Newfoundland + 04:30 Kabul
− 04:00 Halifax + 05:00 Islamabad
− 04:30 Caracas + 05:30 Mumbai
− 05:00 New York + 06:00 Dakar
− 05:30 + 06:30 Yangon
− 06:00 Chicago + 07:00 Bangkok
− 06:30 + 07:30
− 07:00 Denver + 08:00 Beijing
− 07:30 + 08:30
− 08:00 Los Angeles + 09:00 Tokyo
− 08:30 + 09:30 Darwin
− 09:00 Alaska + 10:00 Guam
− 09:30 Marquesas Islands + 10:30 Lord Howe Island
− 10:00 Hawaii + 11:00 Solomon Islands
− 10:30 + 11:30
− 11:00 Midway Islands + 12:00 New Zealand
− 11:30 + 12:45 Chatham Islands
− 12:00 Kwajalein Atoll + 13:00 Phoenix Islands
+ 00:30