Panasonic AG-UX170, Operating Instructions Manual

Page: 156 / 236

- 156 -
≥ This function’s default setting is [F4:].
≥
It is possible to switch the scene number by touching to while displaying the operation
icons. ( l 112 )
≥
You can rename the titles for scene numbers (FLUO, etc.) in [NAME EDIT].
≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. ( l 202 )
You can rename the title of the scene number selected in [FILE SELECT].
1 Touch [NAME EDIT].
2 Enter the desired title.
≥ For information on how to enter characters, refer to page 148 .
≥
Up to 6 alphanumeric characters can be entered.
≥ Touch [Return] to return to the previous screen. (The title will not be renamed to the one that has
been entered.)
3 Touch [Enter].
≥ The title will be updated.
You can save the scene file settings to the SD card or load them from the SD card to this unit.
(
l 100 )
Sets the initial Synchro Scan setting.
≥
Depending on the size and frame rate in [REC FORMAT], the setting range varies. ( l 165 )
1 Touch [SYNCHRO SCAN].
2 Touch / to adjust settings.
3 Touch [EXIT] to complete the setting.
∫
Note on the [SYNCHRO SCAN] setting
A separate [SYNCHRO SCAN] setting is maintained for each size and frame rate in
[REC FORMAT].
≥
Default settings are indicated with underlined text.
[NAME EDIT]
[LOAD/SAVE]
[LOAD]/[SAVE]
[SYNCHRO SCAN]
Frame rates [SYNCHRO SCAN] setting
59.94p/59.94i 1/60.0 to 1/249.7
29.97p 1/30.0 to 1/60.0 to 1/249.7
23.98p 1/24.0 to 1/48.0 to 1/249.6
24.00p 1/24.0 to 1/48.0 to 1/249.9
50.00p/50.00i 1/50.0 to 1/250.0
25.00p 1/25.0 to 1/50.0 to 1/250.0
F1: F6:
AG-UX180.UX170ED(DVQP1171ZA)_E.book 156 ページ ２０１７年３月１５日 水曜日 午後５時５２分