- 111 -
Switching the screen indications/mode information
display
*1 When [DATE/TIME] is set to [TIME], [DATE], or [DATE&TIME]
≥
To cancel the setting, press the DISP/MODE CHK button.
∫
To display the Mode Information
Press and hold the DISP/MODE CHK button to display the mode information screen first. Each time
you press the button, the display mode of the screen switches in the following order:
Mode information display1
#
Mode information display2
#
Mode information display3
#
Mode information display4
#
Mode information display5
#
Normal display
*2 It appears only on
DISP/MODE CHK button
When the DISP/MODE CHK button is pressed, all screen displays disappear, except for the
counter display, time stamp display
*1
, zebra pattern display, marker display, and safety zone
display. (
)
Mode information display1:
Displays the list of functions assigned to the USER buttons
(USER1 to 9).
Mode information display2:
Displays the title given to each scene number of a scene file.
Mode information display3:
Displays the settings assigned to the GAIN button ([GAIN L]/
[GAIN M]/[GAIN H]), the White Balance mode settings assigned to
the WHITE BAL button ([WHITE BAL A]/[WHITE BAL B]/[WHITE
BAL PRST]), and the setting status of the White Balance modes
[Ach] and [Bch] ([AWB A]/[AWB B]).
Mode information display4:
Displays the settings for [OUTPUT SEL]
*2
, [REMOTE REC],
[REMOTE REC LINK], [HDMI TC OUTPUT], [CAMERA
NUMBER], [SUB REC BUTTON] and [SUB ZOOM].
Mode information display5:
Displays the settings for [AUDIO LOW CUT CH1], [AUDIO LOW
CUT CH2], [AUDIO LEVEL CH1], [AUDIO LEVEL CH2], [INPUT1
LINE LEVEL], [INPUT2 LINE LEVEL], [INPUT1 MIC LEVEL] and
[INPUT2 MIC LEVEL].
AG-UX180
AG-UX180ED(DVQP1171ZA)_E.book 111 ページ 2016年11月28日 月曜日 午前11時32分