- 64 -
Setting the User Information
Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as dates, control
numbers, etc., into the User Information.
UB 00 00 00 00
≥
This is displayed only when [PRIORITY MODE] is set to [REC/PB] or [IP]. (
You can set the User Information.
≥
Set [PRIORITY MODE] to [REC/PB] or [IP]. (
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
You can use numbers from 0 to 9 and letters from A to F.
≥
It will be set to “00 00 00 00” when [Reset] is touched.
3
Touch [EXIT] to complete the setting.
≥
When [PRIORITY MODE] is set to [IP(4K)] or [REC/PB(4K)], the [UB PRESET] setting can be changed, but the
changed setting cannot be used.
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
CLP 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [CLIP]))
Select the counting method during the recording.
Select the menu.
To reset the Recording Counter for the Recording Mode
Recording counter will be set to “0:00:00” when the USER button assigned as <RESET> is pressed or the USER icon
is touched while displaying the counter.
≥
Please refer to page
for details about setting the USER button.
[UB PRESET]
: [TC/UB SETUP]
#
[UB PRESET]
[REC COUNTER]
: [DISP SETUP]
#
[REC COUNTER]
#
desired setting
[TOTAL]:
The count continues to increase until the Recording Counter is reset.
[CLIP]:
Resets the Recording Counter at start of recording. Counts the time of each recording
session.
ヮユワヶ
ヮユワヶ
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 64 ページ ２０１７年５月２２日 月曜日 午後２時１１分
