- 63 -
Select the compensation mode for the time code.
≥
Set [SYSTEM FREQ] to [59.94Hz]. (
)
Select the menu.
≥
This item will be set to [NDF] automatically in following cases:
j
When the frame rate in [REC FORMAT] is 23.98p (
≥
This item will be automatically set to [NDF] and will not be displayed as a menu item when [SYSTEM FREQ] is set
to [50.00Hz]. (
Sets the way the time code will move.
Select the menu.
* If the frame rate in [REC FORMAT] or is set to 23.98p, a slight time error may occur when switching to Playback
Mode. (
)
≥
It is automatically set to [FREE RUN] in following cases:
j
When PRE-REC is enabled (
,
)
≥
The time code will reset when the built-in lithium battery is exhausted when it is set to [FREE RUN].
You can set the initial time code.
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
The display will be set to “00h00m00s00f” if you touch [Reset].
≥
“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
3
Touch [EXIT] to complete the setting.
≥
This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT] (
). Therefore, it
may not be continuous from the previous final time code when the recording format is changed.
≥
Counting may not continue from the previous final time code when the Operation Mode is switched from SDI Mode
to CAM Mode.
≥
If the frame rate in [REC FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple of 4. If you enter
a different value, time code will not be recorded correctly.
[DF MODE]
: [TC/UB SETUP]
#
[DF MODE]
#
desired setting
[DF]:
Time code is compensated in accordance with the actual time. It is mainly used for
broadcasting such as TV programs.
[NDF]:
It will not compensate the time code. (There will be a difference from the actual time)
[TCG]
: [TC/UB SETUP]
#
[TCG]
#
desired setting
[FREE RUN]
*
:
It will constantly move.
[REC RUN]:
It will move only when recording.
[TC PRESET]
: [TC/UB SETUP]
#
[TC PRESET]
ヮユワヶ
ヮユワヶ
ヮユワヶ
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 63 ページ 2017年5月22日 月曜日 午後2時11分