Panasonic AG-UMR20E Operating Instructions Manual Download

Page: 223 / 260

- 223 -

Selects the brightness level of the left-leaning zebra patterns on the screen.

Touch [ZEBRA DETECT 1].

≥

Touch [YES].

Touch

to adjust settings.

≥

You can select a value between 50% and 105%.

Touch [EXIT] to complete the setting.

≥

This function’s default setting is “80%”.

Selects the brightness level of the right-leaning zebra patterns on the screen.

Touch [ZEBRA DETECT 2].

≥

Touch [SET].

Touch

to adjust settings.

≥

You can select a value between 50% and 105%.

Touch [EXIT] to complete the setting.

≥

You can display [

ZEBRA 2] after setting the level. (

)

≥

This function’s default setting is “100%”.

The color bar convenient for picture quality adjustment of the external monitor can be displayed. (

)

Type of the color bar can be switched. (

)

You can check if the image is level while recording motion pictures and still pictures. The function can also be used to
estimate the balance of the composition.

≥

The guidelines do not appear on the images actually recorded.

≥

The setting changes as follows when using Focus Assist. (

)

The guidelines are not displayed. (They are displayed on the external monitor when this unit is connected to the
external monitor.)

The setting cannot be changed.

[ZEBRA DETECT 1]

[ZEBRA DETECT 2]

[SET]/[OFF]

[COLOR BARS]

[ON]/[OFF]

[BARS TYPE]

[TYPE1]

[TYPE2]

[GUIDE LINES]

[OFF]/[HORIZONTAL]/[GRID1]/[GRID2]

AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 223 ページ２０１７年５月２２日　月曜日　午後２時１１分

Summary of Contents for AG-UMR20E





































































































































































































































































Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands

Panasonic AG-UMR20E, Operating Instructions Manual

Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands