Panasonic AG-UMR20E Operating Instructions Manual Download

Page: 207 / 260

- 207 -

[SW SETUP]

All default settings are indicated with underlined text.

Switches to auto control for backlight compensation. (

)

The image of the screen can be brightened so the backlit subject does not get dark due to light hitting from rear.

Switches to auto control for spotlight. (

)

Excessively bright subject can be recorded beautifully.

The built-in optical ND filter (light intensity adjustment filter) can be switched. (

)

Switches the Auto/Manual of the iris adjustment. (

)

Switches the Auto/Manual of the gain adjustment. (

)

Sets the maximum possible gain value for Auto Gain Mode. (

)

Changes the gain value to the setup of [SUPER GAIN]. (

)

: [SW SETUP]

desired setting

[BACKLIGHT COMPENS.]

[ON]/[OFF]

[SPOTLIGHT COMPENS.]

[ON]/[OFF]

[ND FILTER]

[CLEAR]/[1/4]/[1/16]/[1/64]

[IRIS MODE]

[AUTO]/[MANUAL]

[GAIN MODE]

[AUTO]/[MANUAL]

[AGC LIMIT]

[3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB]/[27 dB]/[30 dB]

[SUPER GAIN]

[ON]/[OFF]

ヮユワヶ

AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 207 ページ２０１７年５月２２日　月曜日　午後２時１１分

Summary of Contents for AG-UMR20E





































































































































































































































































Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands

Panasonic AG-UMR20E, Operating Instructions Manual

Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands